Good afternoon, thanks for the reply! On your instructions I have installed the module failover. But there are some interesting things: when I start asterisk with the command:
/etc/init.d/asterisk start
in the console there is a error:
CLI> failover show
* DEVICE#1: openvox_failover_1 /dev/ttyUSB0
INTERVAL:4000 EVENT:logger AUTORUN:yes STATE:ERROR
If you run the command:
asterisk &
all right. Please tell me why the difference?
CLI>failover show
* DEVICE#1: openvox_failover_1 /dev/ttyUSB0 VERSION:1.0
INTERVAL:4000 EVENT:logger AUTORUN:yes STATE:RUNNING