- Thank you received: 0
- Forum
- Telephony Cards Support
- A400/800/1200 Series
- A400P can't make outgoing calls with dahdi, fine with zap
×
Questions about A400/800/1200 Analog Interface Card
A400P can't make outgoing calls with dahdi, fine with zap
13 years 8 months ago #6010
by Xeitail
Hi,
I've got a Openvox A400P (TDM400P Clone) with 1x FXO running on FreeBSD 8.1 with Asterisk 1.4.29 (I also tried in 1.6.0.21 and got the same thing) and I'm having trouble dialing out with the dahdi-freebsd-complete-2.3.0-rc2+2.3.0 drivers. Here are my configs:
"/usr/local/etc/dahdi/system.conf" 4L, 55C
"/usr/local/etc/asterisk/chan_dahdi.conf" 16L, 244C
"/usr/local/etc/asterisk/extensions.conf" [readonly] 614L, 22781C
It's also being detected fine by the kernel, output of dmesg:
Incoming calls work just fine, when I try to make an outgoing call though I just get my call timing out hanging up. Followed by this on the asterisk console:
NOTE: I've censored the phone number.
I've plugged another phoneline in and a cordless phone to that to listen to the signal and I can certainly hear asterisk hanging up and taking the phone off the hook.
I tried the zaptel-1.4.11.3 drivers however found that fxotune was broken (probes all modules /dev/zap/1-254 as opposed to the one with the FXO module and then eventually kernel panics) and while I could make outgoing calls with this and recieve I couldn't tune my modules, dahdi seems to fix this problem making pstn calls that I receive much clearer, however it's kind of useless not being able to make any calls.
Also I've tried echo "hint.wctdm.0.opermode="AUSTRALIA"" >> /boot/device.hints this does nothing I had to modify some source code:
i] Last edited by Xeitail at 2010-8-14 17:08 [/i
I've got a Openvox A400P (TDM400P Clone) with 1x FXO running on FreeBSD 8.1 with Asterisk 1.4.29 (I also tried in 1.6.0.21 and got the same thing) and I'm having trouble dialing out with the dahdi-freebsd-complete-2.3.0-rc2+2.3.0 drivers. Here are my configs:
"/usr/local/etc/dahdi/system.conf" 4L, 55C
fxsls=1
loadzone=au
defaultzone=au
echocanceller=mg2,1
"/usr/local/etc/asterisk/chan_dahdi.conf" 16L, 244C
[channels]
context=default
usecallerid=yes
hidecallerid=no
immediate=no
signalling=fxs_ls
callerid=pstn <pstnNumberCensored>
group=1
channel=>1
echocancel=128
echocancelwhenbridged=yes
echotraining=800
callgroup=1
pickupgroup=1
rxgain=9.0
txgain=-6.0
"/usr/local/etc/asterisk/extensions.conf" [readonly] 614L, 22781C
[outgoing]
exten => 600,1,Playback(demo-echotest) ; Let them know what's going on
exten => 600,n,Echo ; Do the echo test
exten => 600,n,Playback(demo-echodone) ; Let them know it's over
exten => 600,n,Goto(s,6) ; Start over
exten => _0X.,1,DIAL(dahdi/1/${EXTEN},60,otr)
exten => _0X.,2,Congestion
It's also being detected fine by the kernel, output of dmesg:
Telephony Interface Registered on major 196
Version: 2.3.0-rc2
wctdm0: vendor=e159 device=1 subvendor=b100
wctdm0: <Wildcard TDM400P REV E/F> port 0xde00-0xdeff mem 0xfdbff000-0xfdbfffff irq 20 at device 0.0 on pci3
wctdm0: [FILTER]
Freshmaker version: 71
Freshmaker passed register test
Module 0: Installed -- AUTO FXO (AUSTRALIA mode)
Module 1: Not installed
Module 2: Not installed
Module 3: Not installed
Found a Wildcard TDM: Wildcard TDM400P REV E/F (1 modules)
Registered echo canceler 'MG2'
Registered tone zone 1 (Australia)
Incoming calls work just fine, when I try to make an outgoing call though I just get my call timing out hanging up. Followed by this on the asterisk console:
-- Saved useragent "Ekiga/3.2.6" for peer 1000
-- Executing [phoneNumber@outgoing:1] Dial("SIP/1000-00000000", "dahdi/1/phoneNumber|60|otr") in new stack
-- Called 1/phoneNumber
-- Hungup 'DAHDI/1-1'
== Spawn extension (outgoing, phoneNumber, 1) exited non-zero on 'SIP/1000-00000000'
NOTE: I've censored the phone number.
I've plugged another phoneline in and a cordless phone to that to listen to the signal and I can certainly hear asterisk hanging up and taking the phone off the hook.
I tried the zaptel-1.4.11.3 drivers however found that fxotune was broken (probes all modules /dev/zap/1-254 as opposed to the one with the FXO module and then eventually kernel panics) and while I could make outgoing calls with this and recieve I couldn't tune my modules, dahdi seems to fix this problem making pstn calls that I receive much clearer, however it's kind of useless not being able to make any calls.
Also I've tried echo "hint.wctdm.0.opermode="AUSTRALIA"" >> /boot/device.hints this does nothing I had to modify some source code:
diff -ur work/dahdi-freebsd-complete-2.3.0-rc2+2.3.0/freebsd/drivers/dahdi/wctdm.c work.1/dahdi-freebsd-complete-2.3.0-rc2+2.3.0/freebsd/drivers/dahdi/wctdm.c
--- work/dahdi-freebsd-complete-2.3.0-rc2+2.3.0/freebsd/drivers/dahdi/wctdm.c 2010-06-01 18:32:14.000000000 +0930
+++ work.1/dahdi-freebsd-complete-2.3.0-rc2+2.3.0/freebsd/drivers/dahdi/wctdm.c 2010-08-13 18:10:42.000000000 +0930
@@ -338,7 +338,7 @@
static int boostringer = 0;
static int fastringer = 0;
static int _opermode = 0;
-static char *opermode = "FCC";
+static char *opermode = "AUSTRALIA";
static int fxshonormode = 0;
static int alawoverride = 0;
static int fastpickup = 0;i] Last edited by Xeitail at 2010-8-14 17:08 [/i
- xin.liu
-
- Offline
- New Member
-
- Best Regards! <br /> xin.liu<br /> Email: [email protected]
Less
More
- Thank you received: 0
13 years 8 months ago #6012
by xin.liu
Hi,
Please send your SSH to me.
My Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
My MSN:[email protected]
Please send your SSH to me.
My Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
My MSN:[email protected]
13 years 7 months ago #6045
by Xeitail
I can report that dahdi-freebsd-complete-2.4.0-rc2+2.4.0-rc1 fixes this problem. The new version of the driver committed today works perfectly.
dahdi 2.4.0rc2 misc files touched by this commit Digium/Asterisk Hardware Device Interface
Update to 2.4.0-rc2.
Most notable changes are:
- wctdm, wcte11xp, wcte12xp drivers are no longer experimental
- outgoing FXO calls now work properly
- experimental wctc4xxp support
- experimental sparc64 support
Add a bchan patch for zaphfc driver.
- lisa.gao
-
- Offline
- New Member
-
- Regards!<br /> lisa.gao<br /> <br /> Email:[email protected]
Less
More
- Thank you received: 0
13 years 7 months ago #6100
by Xeitail
Modifying the source is not necessary anymore to put the FXO module into 'AUSTRALIA' mode or another mode.So for wctdm do:before loading the driver or just
i] Last edited by Xeitail at 2010-9-2 08:20 [/i
01 Sep 2010 16:22:32
Original commit files touched by this commit 2.4.0rc4_2
Fix wctdm driver parameters declaration.kenv dahdi.wctdm.opermode=AUSTRALIAecho dahdi.wctdm.opermode="AUSTRALIA" >> /boot/loader.confi] Last edited by Xeitail at 2010-9-2 08:20 [/i
- lisa.gao
-
- Offline
- New Member
-
- Regards!<br /> lisa.gao<br /> <br /> Email:[email protected]
Less
More
- Thank you received: 0
- Forum
- Telephony Cards Support
- A400/800/1200 Series
- A400P can't make outgoing calls with dahdi, fine with zap
Time to create page: 0.041 seconds