i have an elastix server with an e1 card (model=openvox)
i want to trunk between this server with an alcatel omnipcx enterprise
there is an E1 card on alcatel too
please if any one knows how to config alcatel and elastix server , help me
tnx million
I have no idea how to setup the alcatel server, but if you can configure it as NET or CPE mode and setup the right signalling, I can help you to connect the elastix server.
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Skype: tim.jjune
hi dear tim
this is mohammad habili
acctually i have problems in trunking between Alcatel and Elastix
please help me dear if you can,
i have an Elastix server with an E1 card with 2 OPENVOX ports.
and an Alcatel omnipcx with an E1 card too
i trunk elastix and alcatel with PRI
now i have calls from Alcatel to Elastix but no call from Elastix to Alcatel so i can't call Alcatel's extensions.
please check my DAHDI and SYSTEM configurations as below
dahdi-chanels.conf
***************************************
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;