conect alcatel and elastix with trunk pri

hi to all
How do I connect using ALCATEL elastix with a pri trunk?

Just setup one server as NET side and another as CPE, use RJ48 crosscable to connect both ports.

i have an elastix server with an e1 card (model=openvox)
i want to trunk between this server with an alcatel omnipcx enterprise
there is an E1 card on alcatel too
please if any one knows how to config alcatel and elastix server , help me
tnx million

I have no idea how to setup the alcatel server, but if you can configure it as NET or CPE mode and setup the right signalling, I can help you to connect the elastix server.

hi dear tim
this is mohammad habili
acctually i have problems in trunking between Alcatel and Elastix
please help me dear if you can,

i have an Elastix server with an E1 card with 2 OPENVOX ports.
and an Alcatel omnipcx with an E1 card too

i trunk elastix and alcatel with PRI
now i have calls from Alcatel to Elastix but no call from Elastix to Alcatel so i can't call Alcatel's extensions.
please check my DAHDI and SYSTEM configurations as below


system.conf
********************************
# Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
span=1,1,0,ccs,hdb3
# termtype: te
bchan=1-15,17-31
dchan=16
echocanceller=oslec,1-15,17-31

# Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
span=2,2,0,ccs,hdb3
# termtype: te
bchan=32-46,48-62
dchan=47
echocanceller=oslec,32-46,48-62

# Global data

loadzone = us
defaultzone = us


dahdi-chanels.conf
***************************************
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;

; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
group=1
context=from-pstn
switchtype = euroisdn
signalling = pri_cpe
channel => 1-15,17-31
context = default
group = 63

; Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
group=2
context=from-pstn
switchtype = euroisdn
signalling = pri_net
channel => 32-46,48-62
context = default
;group =63


dear please please help me as soon as possible.

Send me remote access, i will check for you!