[align=left]options opvxa1200 opermode=RUSSIA cidbeforering=1 cidbuflen=1 fixedtimepolarity=1[/align] Very interesting, that connected Cisco 6941 telephones shows right number, but wrong name - 063 (omitting unknown chars).
-- Executing [s@macro-user-callerid:2] Set("DAHDI/2-1", "AMPUSER=·0±·ёІ63ґё") in new stack
-- Executing [s@macro-user-callerid:3] GotoIf("DAHDI/2-1", "0?report") in new stack
-- Executing [s@macro-user-callerid:4] ExecIf("DAHDI/2-1", "1?Set(REALCALLERIDNUM=·0±·ёІ63ґё)") in new stack
-- Executing [s@macro-user-callerid:5] Set("DAHDI/2-1", "AMPUSER=") in new stack
-- Executing [s@macro-user-callerid:6] Set("DAHDI/2-1", "AMPUSERCIDNAME=") in new stack
-- Executing [s@macro-user-callerid:7] GotoIf("DAHDI/2-1", "1?report") in new stack
-- Goto (macro-user-callerid,s,15)
-- Executing [s@macro-user-callerid:15] GotoIf("DAHDI/2-1", "0?continue") in new stack
-- Executing [s@macro-user-callerid:16] Set("DAHDI/2-1", "__TTL=64") in new stack
-- Executing [s@macro-user-callerid:17] GotoIf("DAHDI/2-1", "1?continue") in new stack
-- Goto (macro-user-callerid,s,28)
-- Executing [s@macro-user-callerid:28] Set("DAHDI/2-1", "CALLERID(number)=·0±·ёІ63ґё") in new stack
-- Executing [s@macro-user-callerid:29] Set("DAHDI/2-1", "CALLERID(name)=·0±·ёІ63ґё") in new stack
-- Executing [s@macro-user-callerid:30] Set("DAHDI/2-1", "CDR(cnum)=·0±·ёІ63ґё") in new stack
-- Executing [s@macro-user-callerid:31] Set("DAHDI/2-1", "CDR(cnam)=·0±·ёІ63ґё") in new stack
-- Executing [s@macro-user-callerid:32] Set("DAHDI/2-1", "CHANNEL(language)=ru") in new stack
I have reinstalled different versions of freepbx and asterisk - situation the same. Please help.
Hi,
I need to debug on your cid signal and adjust the parameter related to cid settings.
Pls send me remote access info.
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Skype ID: tim.jjune
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Skype: tim.jjune