A800P load alwyse with hisax

Hi

I flow exactely this document
http://downloads.openvox.cn/pub/manuals/V2.2/English/A800P_on_DAHDI_User_Manual.pdf to install all package

but I have alwyse A800P loaded with hisax



03:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
Subsystem: Device b500:0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <;PERR- INTx-
Latency: 64 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e800
Region 1: Memory at febff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: hisax


in blacklist.conf

blacklist hisax
blacklist hisax_fcpcipnp
blacklist isdn
blacklist hisax
blacklist netjetpci
blacklist netjet
blacklist hisax
blacklist wcopenpci

[root@localhost ~]# lsmod | grep "opvxa1200"
opvxa1200 - 42732 0
dahdi 203208 15 xpp,dahdi_transcode,zaphfc,wcb4xxp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,dahdi_voicebus,opvxa1200,opvxa24xx,opvxd115,wct4xxp
[root@localhost ~]#

uname -a
Linux localhost.localdomain 2.6.18-348.6.1.el5 #1 SMP Tue May 21 15:34:22 EDT 2013 i686 i686 i386 GNU/Linux
[root@localhost ~]#

[root@localhost ~]# dahdi_cfg -vvvvvvvvvvvv
DAHDI Tools Version - 2.6.2

DAHDI Version: 2.6.2
Echo Canceller(s): HWEC
Configuration
======================


Channel map:


0 channels to configure.

CentOS 5.6

I tryied rmmod netjet
rmmod hisax
restart dahdi many time but no hardware detected

so what I can do ?

please I turne with this problem since one week and I do many setup with centos 6.2 / 5.6 / 5.3 and dahdi 2.4 *2.0 / 2.6.
Same probleme

Thank you to help me:'(:'(:'(




i] Last edited by kamel.berrayah at 2013-6-9 10:28 [/i

Hi,
Please try command "modprobe -r hisax" and "modprobe opvxa1200", then show me the ouput by command "dmesg".

thank you to your replay

modprobe -r hisax
modprobe opvxa1200

sorry but the result of the command dmseg is very big , how I can send you the file ?

Hi,
Please send it to me by Email. My Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Hi

I sent you E-mail

also I put the resukt in my site : http://kamel.berrayah.com/openvox/dmesg.txt

I apreciate your help , I am waiting ...

Hi

It s a big mistake what I did , this is not a OpenVox card it s juste the fxs/fxo modules from openvox

thank you very very mush svolta ,
and thank you to openvox support you give a best support ever I can imagine