Annoying clicks on the audio, sync messages in dmesg

This is de dmesg in the pentium 3,
After loading the module, the buffer re-sync just happens one time:

OpenVox A1200P version: 1.2
OpenVox A1200P passed register test
Module 0: Installed -- AUTO FXS/DPO
Module 1: Installed -- AUTO FXS/DPO
Module 2: Installed -- AUTO FXS/DPO
Module 3: Installed -- AUTO FXS/DPO
Module 4: Installed -- AUTO FXS/DPO
Module 5: Installed -- AUTO FXO (FCC mode)
Module 6: Installed -- AUTO FXO (FCC mode)
Module 7: Installed -- AUTO FXO (FCC mode)
Module 8: Installed -- AUTO FXO (FCC mode)
Module 9: Installed -- AUTO FXO (FCC mode)
Module 10: Not installed
Module 11: Not installed
Found a OpenVox A1200P: Version 1.2 (10 modules)
buffer re-sync occur from 0 to 3
usbcore: registered new driver wcusb
Wildcard USB FXS Interface driver registered
usbcore: deregistering driver wcusb
INFO-xpp: revision trunk-r4515 MAX_XPDS=64 (8*
INFO-xpp: FEATURE: with ECHO_SUPPRESSION
INFO-xpp: FEATURE: without XPP_EC_CHUNK
INFO-xpp: FEATURE: without BRISTUFF support
INFO-xpp: FEATURE: without sync_tick() from ZAPTEL
INFO-xpp: FEATURE: with PROTOCOL_DEBUG
INFO-xpp_usb: revision trunk-r4515
usbcore: registered new driver xpp_usb
usbcore: deregistering driver xpp_usb
Registered tone zone 0 (United States / North America)
[root@elastix ~]#

Any help?
I need to have this server ready for monday.
I have already postponed it once, can't do it again.

You haven't replied about the dmesg and de click issue.
You must know about this bug on your driver, and maybe you want to blame someone else?

I have recompiled it with zaptel 1.4.5.1 an 1.4.6 an I have the same results.
I have even modified opvxa1200.c an removed the re-sync lines, and then I get no more messages, but audio suddenly stops and then in some seconds comes back.

I have also tried to install Tribox Openvox edition, but doesn't detect the sata controller, while Elastix does.

Any suggestions??

Buy a Digium card?
I'll do it next time for sure.

I didn't like to pay 170€ for customs at all, Openvox are not as cheap as I thought.
The product driver is buggy, and the support is awful.

Hi, ramoncio. The click is necessary for the echotraining.

You can solve this problem if you turn off the echo training in zapata.conf, located under the 'Channels' context.

Hope it will helps.

Alisher

Dear Ramoncio:

We appoligize for the latency of reply your question. the power stopped at saturday in our office.

For the question you asked, it is a H/W compatilible issue or a linux chipset device driver issue. In order to solve the issue, we suggest use Intel chipset motherboard, and not use the latest model. Intel 945 should be ok for this card.

Do not use E2xxx dual core cpu, use the older models that already sold in the market for 1 years or more.

the sata driver is not supported in trixbox openvox edition is because the linux core in trixbox is 2.6.9, but 2.6.18 in elastix.

in order to make the card work, you have to take care linux version, and motherboard you are using. newest model often have compatibility issue,

Hope this helpful.