×
Notice
The forum is in read only mode.
-
Forum
-
Telephony Cards Support
-
A400/800/1200 Series
-
大家好,关于dtmf来电显示问题,请求帮助!
×
Questions about A400/800/1200 Analog Interface Card
大家好,关于dtmf来电显示问题,请求帮助!
15 years 1 month ago #2785
by blackmasklgf
我执行
modprobe zaptel
modprobe wctdm cidbeforering=1 cidbuflen=1
ztcfg -vvvvvvvvv
然后asterisk -r
restart now
还是没有取到callerid
哪一步做错了吗?
15 years 1 month ago #2786
by miaolin
restart 之后模块重新加载就没有参数了,你得在modprode.conf里面加上参数,才能每次启动都自动加参数。
15 years 1 month ago #2787
by blackmasklgf
#vi /etc/modprobe.conf
alias eth0 e100
alias scsi_hostadapter ata_piix
alias snd-card-0 snd-intel8x0
options snd-card-0 index=0
options snd-intel8x0 index=0
remove snd-intel8x0 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-intel8x0
加到哪里呢?
15 years 1 month ago #2788
by miaolin
随便在哪个options后面加1行
options wctdm cidbeforering=1 cidbuflen=1
15 years 1 month ago #2789
by blackmasklgf
Original posted by blackmasklgf at 2009-3-6 22:07
我执行
modprobe zaptel
modprobe wctdm cidbeforering=1 cidbuflen=1
ztcfg -vvvvvvvvv
然后asterisk -r
restart now
还是没有取到callerid
哪一步做错了吗?
我尝试加载了多次,还是不行
-
Forum
-
Telephony Cards Support
-
A400/800/1200 Series
-
大家好,关于dtmf来电显示问题,请求帮助!
Time to create page: 0.050 seconds