Need help! How to contact the outside world?

hi:
yes, you can change to this:
=======================
[isdn_openvox]
; define your ports, e.g. 1,2 (depends on mISDN-driver loading order)
ports=1,2,3,4; for your case
; context where to go to when incoming Call on one of the above ports
msns=*
context=from-pstn
==================
regards!
James.zhu

[root@elastix src]# misdn-init start

---

Loading module(s) for your misdn-cards:

---

/sbin/modprobe --ignore-install hfcmulti type=0x4 protocol=0x2,0x2,0x2,0x2 layermask=0xf,0xf,0xf,0xf poll=128 debug=0
/sbin/modprobe mISDN_dsp debug=0x0 options=0 poll=128 dtmfthreshold=100

It doesnt load correctly... I did ports=1,2,3,4 instead 1 to 8.

hi:
what you mean by this:
============================
It doesnt load correctly... I did ports=1,2,3,4 instead 1 to 8.
==============================
you have to run:
mISDN scan
mISDN config
mISDN start

please email me the ssh to:[email protected]
regards!
James.zhu

Ok i did

[root@elastix src]# mISDN scan
1 mISDN compatible device(s) found:
>> BN4S0

[root@elastix src]# mISDN config
Writing /etc/mISDN.conf for 1 mISDN compatible device(s):
>> BN4S0
/etc/mISDN.conf already present, saving a backup: /etc/mISDN.conf.bak


[root@elastix src]# mISDN start

-- Loading mISDN modules --
>> /sbin/modprobe --ignore-install capi
>> /sbin/modprobe --ignore-install mISDN_core debug=0
>> /sbin/modprobe --ignore-install mISDN_l1 debug=0
>> /sbin/modprobe --ignore-install mISDN_l2 debug=0
>> /sbin/modprobe --ignore-install l3udss1 debug=0
>> /sbin/modprobe --ignore-install mISDN_capi
>> /sbin/modprobe --ignore-install hfcmulti type=0x4 protocol=0x2,0x2,0x2,0x2 layermask=0xf,0xf,0xf,0xf poll=128 debug=0 timer=0
>> /sbin/modprobe --ignore-install mISDN_dsp debug=0 options=0

Did it load correctly?

Okay it worked!

I now add a custom trunk.
But I dont know what to put in the custom dail string? I put mISDN/<port 1>/$OUTNUM(eg. mISDN/3/$OUTNU in the dail string. Is this good?

hi:
Please send your extranet IP address to us:
This email address is being protected from spambots. You need JavaScript enabled to view it.
if you do not know how to let us log into your system, please ask your support for help