keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about A810/1610/2410 Advanced Analog Interface Card

[patch] Unable to compile dahdi-linux-mod of RHEL 5.6 (and derivates)

11 years 3 weeks ago #8723 by zbuzz1
I'm still having this issue, I've made the changes in the patch, but I still see the following when I run the make command.

[root@localhost dahdi-linux-complete-2.3.0.1+2.3.0]# make
make -C linux all
make[1]: Entering directory `/usr/src/dahdi-linux-complete-2.3.0.1+2.3.0/linux'
make -C drivers/dahdi/firmware firmware-loaders
make[2]: Entering directory `/usr/src/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/firmware'
make[2]: Leaving directory `/usr/src/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/firmware'
You do not appear to have the sources for the 2.6.18-308.4.1.el5PAE kernel installed.
make[1]: *** [modules] Error 1
make[1]: Leaving directory `/usr/src/dahdi-linux-complete-2.3.0.1+2.3.0/linux'
make: *** [all] Error 2

Any help would be appreciated.
11 years 3 weeks ago #8725 by tim.june
You need to install a matched kernel-devel:
# yum install kernel-devel-`uname -r`
Then try again!
BTW, pls download the driver from this link:
http://downloads.openvox.cn/pub/drivers/dahdi-linux-complete/releases/1.3.5/

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Skype: tim.jjune
10 years 7 months ago #9072 by sorenaa_s
I get below error for "modprobe dahdi". what is my wrong?

#modprobe dahdi
FATAL: Error inserting dahdi (/lib/modules/2.6.18-348.1.1.el5/dahdi/dahdi.ko): Unknown symbol in module, or unknown parameter (see dmesg)

#dmesg
dahdi: Unknown symbol chan_sysfs_create
dahdi: Unknown symbol dahdi_sysfs_chan_exit

i] Last edited by sorenaa_s at 2013-9-13 00:50 [/i
10 years 7 months ago #9073 by hua
HI
Please send SSH info to my E-mail This email address is being protected from spambots. You need JavaScript enabled to view it. , I will check it , Below is my Skype upper.hua .

Best regards
upper
Time to create page: 0.041 seconds
Powered by Kunena Forum