Problem when I restart my box

hello,
please email me a ssh to :[email protected]. I will check that next Monday.
regards!
James.zhu

hello,
this is what i did manually in your system:
[root@elastix ~]# service zaptel stop
Unloading zaptel hardware drivers:.
[root@elastix ~]# modprobe zaptel
[root@elastix ~]# modprobe wct4xxp
[root@elastix ~]# modprobe wctdm
[root@elastix ~]# ztcfg -vvvv
Changing signalling on channel 80 from Unused to Clear channel
Changing signalling on channel 81 from Unused to Clear channel
Changing signalling on channel 82 from Unused to Clear channel
Changing signalling on channel 83 from Unused to Clear channel
Changing signalling on channel 84 from Unused to Clear channel
Changing signalling on channel 85 from Unused to Clear channel
Changing signalling on channel 86 from Unused to Clear channel
Changing signalling on channel 87 from Unused to Clear channel
Changing signalling on channel 88 from Unused to Clear channel
Changing signalling on channel 89 from Unused to Clear channel
Changing signalling on channel 90 from Unused to Clear channel
Changing signalling on channel 91 from Unused to Clear channel
Changing signalling on channel 92 from Unused to Clear channel
Changing signalling on channel 93 from Unused to Clear channel
Changing signalling on channel 94 from Unused to Clear channel
Changing signalling on channel 95 from Unused to Clear channel
Changing signalling on channel 96 from Unused to Clear channel
Changing signalling on channel 97 from Unused to Clear channel
Changing signalling on channel 98 from Unused to Clear channel
Changing signalling on channel 99 from Unused to Clear channel
Changing signalling on channel 100 from Unused to Clear channel
Changing signalling on channel 101 from Unused to Clear channel
Changing signalling on channel 102 from Unused to Clear channel
Changing signalling on channel 103 from Unused to Clear channel
Changing signalling on channel 104 from Unused to Clear channel
Changing signalling on channel 105 from Unused to Clear channel
Changing signalling on channel 106 from Unused to Clear channel
Changing signalling on channel 107 from Unused to Clear channel
Changing signalling on channel 108 from Unused to Clear channel
Changing signalling on channel 109 from Unused to HDLC with FCS check
Changing signalling on channel 110 from Unused to Clear channel
Changing signalling on channel 111 from Unused to Clear channel
Changing signalling on channel 112 from Unused to Clear channel
Changing signalling on channel 113 from Unused to Clear channel
Changing signalling on channel 114 from Unused to Clear channel
Changing signalling on channel 115 from Unused to Clear channel
Changing signalling on channel 116 from Unused to Clear channel
Changing signalling on channel 117 from Unused to Clear channel
Changing signalling on channel 118 from Unused to Clear channel
Changing signalling on channel 119 from Unused to Clear channel
Changing signalling on channel 120 from Unused to Clear channel
Changing signalling on channel 121 from Unused to Clear channel
Changing signalling on channel 122 from Unused to Clear channel
Changing signalling on channel 123 from Unused to Clear channel
Changing signalling on channel 124 from Unused to Clear channel
Changing signalling on channel 125 from Unused to FXS Kewlstart
Changing signalling on channel 126 from Unused to FXS Kewlstart
Changing signalling on channel 127 from Unused to FXS Kewlstart
Changing signalling on channel 128 from Unused to FXS Kewlstart
[root@elastix ~]#
there is no extra error message come out.
when i reboot the system, i still can see the channels in asterisk channels and dmesg show no errors.
you do not add the service zaptel stop in your S90zaptel file. please do not run the ztcfg again, if you want to do that, you have to unload the modules and reload it, then you can use ztcfg -vvv.
regards!
James.zhu

I restart the server 6 time and all is ok, I think you are right the problem was the configuration of the file S09zaptel,

I need to add allways this line (zaptel stop) in all my server?

Thanks,

Rodrigo Cuadra

James:

I migrate my cliento to Elastix 1.5.3. This version have Dahdi instead zaptel.

I have the same problem when I restart the server.

Do you have solution for Dahdi like zaptel solution.

Thanks,

Rodrigo Cuadra

hello,
just change the code like what i did with zaptel. i think it should ok.
by the way, dahdi is not stable currently, i suggest using zaptel-1.4.10, do use too new versions. it may cause some problems.
regards!
James.zhu