×
Notice
The forum is in read only mode.
-
Forum
-
Telephony Cards Support
-
B100/200/400/800 Series
-
B400 with Ubuntu Karmic kernel 2.6.31.15
×
Questions about B100/200/400/800 ISDN BRI Cards
B400 with Ubuntu Karmic kernel 2.6.31.15
14 years 3 months ago #4281
by sbeck
hi,
what is the best way to get the b400 working with asterisk in ubuntu karmic.
mISDN is already integrated into the kernel but how can i complie and replace the hfcmulti.ko?
the card is recogniced and the standard hfcmulti is loaded.
uname -a
Linux foxy 2.6.31-15-server #50-Ubuntu SMP Tue Nov 10 15:50:36 UTC 2009 x86_64 GNU/Linux
lspci shows the follwing:
06:00.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01)
Subsystem: Cologne Chip Designs GmbH Device e888
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at d100 [disabled]
Region 1: Memory at ec501000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: hfc_multi
Kernel modules: hfcmulti
best regards
stefan beck
-
Robert
-
-
Visitor
-
14 years 3 months ago #4287
by Robert
-
Forum
-
Telephony Cards Support
-
B100/200/400/800 Series
-
B400 with Ubuntu Karmic kernel 2.6.31.15
Time to create page: 0.051 seconds