OPen vox b100p with elastix 1.6.12

Hi there , well i´m try to configure elastix to replace my old panasonic telephonic system.
I bought a openvox b100p to try the quality of calls via pstn , so far i cant work with it.
My environmment is a elastix 1.6.12 with isdn nt from portugal, when i conect the card elastix recogniz it but it gives me an error in console mdl_error|req(tei_12).
Can someone give the step by step tutorial, its driving me crazy

hi:
please double the line. have you follow the user manual for that and set PTP/PTMP?

Well, I´ve done everything nothing works.
I instaled elastix 1.6(kernel version - 2.6.18-164.e15 ; asterisk version 1.4.26.1 ; mISDN version 1.1.9.1), than i put the card on the on the server. 
Detected the hardware with gui interface, and elastix give me this:
Port 1: TE-mode BRI S/T interface line (for phone lines)
-> Protocol: DSS1 (Euro ISDN)
-> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib.
-> childcnt: 2
* Port NOT useable for PBX (maybe there is already a PBX running?)

Now when i reboot the server elastix gives me the error on the console screen:
mdl_error|req(tei_12)
I dont know what the hell is this.
I keep configure the card doing the:
misdn scan
misdn config
misdn start

When i do the misdn start gives me information:
l
[root@elastix /]# mISDN scan
1 mISDN compatible device(s) found:
>> hfcpci
[root@elastix /]# mISDN config
Writing /etc/mISDN.conf for 1 mISDN compatible device(s):
>> hfcpci
/etc/mISDN.conf already present, saving a backup: /etc/mISDN.conf.bak
[root@elastix /]# mISDN start
-- Loading mISDN modules --
>> /sbin/modprobe --ignore-install capi
>> /sbin/modprobe --ignore-install mISDN_core debug=0
>> /sbin/modprobe --ignore-install mISDN_l1 debug=0
>> /sbin/modprobe --ignore-install mISDN_l2 debug=0
>> /sbin/modprobe --ignore-install l3udss1 debug=0
>> /sbin/modprobe --ignore-install mISDN_capi
>> /sbin/modprobe --ignore-install hfcpci protocol=0x2 layermask=0xf
>> /sbin/modprobe --ignore-install mISDN_dsp debug=0 options=0


Than i go to etc/mISDN.conf 


[root@elastix ~]# cd ..
[root@elastix /]# cd etc
[root@elastix etc]# vi mISDN.conf
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Module: hfcsusb
Options: debug=<number> poll=<number>
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Module: xhfc
Options: debug=<number>
Port Attributes: mode=(te|nt), link=(ptp|ptmp), line=(s0|up) capi=(yes|no)
lineloop_b1=(yes|no) lineloop_b2=(yes|no), lineloop_d=(yes|no)
polx=(yes|no)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Module: mISDN_dsp
Options: debug=<number>, options=<number>, poll=<number>,
dtmfthreshold=<number>
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-->
<mISDNconf>
<module poll="128" debug="0" timer="no">hfcmulti</module>
<module debug="0" options="0">mISDN_dsp</module>
<devnode user="root" group="root" mode="644">mISDN</devnode>
<card type="hfcpci">
<port mode="te" link="ptmp">1</port>
</card>
</mISDNconf>


Changed the link to point to mutipoint, my line is point to multipoint.

and than edit the etc/asterisk/misdn.conf:

; adding the postfix 'ptp' to a port number is obsolete now, chan_misdn
; parses /etc/misdn-init.conf and sets the ptp mode to the corresponding
; configs. For backwards compatibility you can still set ptp here.
;
ports=1

[first_extern]
; again port defs
ports=1
; again a context for incoming calls
context=Extern1
; msns for te ports, listen on those numbers on the above ports, and
; indicate the incoming calls to asterisk
; here you can give a comma separated list or simply an '*' for
; any msn.
msns=*

; here an example with given msns
[second_extern]
ports=1
context=from-pstn
callerid=15
msns=*



and i changed the things that are underline

and than


i make asterisk -r
misdn show stacks
and give me this:


Connected to Asterisk 1.4.26.1 currently running on elastix (pid = 6169)
Verbosity is at least 3
elastix*CLI> misdn show stacks
BEGIN STACK_LIST:
* Port 1 Type TE Prot. PMP L2Link DOWN L1Link:DOWN Blocked:0 Debug:0
elastix*CLI>


Can someone help me here open vox people
Is the card that is malfuncioning or is missing some configuration

Hope someone could help me here
thanks in advanced.


Pedro Geraldes

hi:
what is the error:
=========================
Protocol: DSS1 (Euro ISDN)
-> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib.
-> childcnt: 2
* Port NOT useable for PBX (maybe there is already a PBX running?)
=========================
something is wrong here. by the way, after load the drivers, run : dmesg, do you see any errors?
from asterisk console, the layer1 and layer 2 are down, please double the physical connection.
or if still can not solve, you MUST give ssh to check that.

i dont know what happen but now its runing smoth i can make calls and receive inbound rotes , it´s fully working . i just changed the trunk to mISDN/1/$OUTNUM$ and i have
mISDN/g:isdn/$OUTNUM$ and in console run asterisk -r. i dont know what was wrong.
But now is fully working. if someone could tell me what happen i really appreciate.
thanks in advanced

I think the problem is ISDN moderm