Hi there , well i´m try to configure elastix to replace my old panasonic telephonic system.
I bought a openvox b100p to try the quality of calls via pstn , so far i cant work with it.
My environmment is a elastix 1.6.12 with isdn nt from portugal, when i conect the card elastix recogniz it but it gives me an error in console mdl_error|req(tei_12).
Can someone give the step by step tutorial, its driving me crazy
Well, I´ve done everything nothing works.
I instaled elastix 1.6(kernel version - 2.6.18-164.e15 ; asterisk version 1.4.26.1 ; mISDN version 1.1.9.1), than i put the card on the on the server.
Detected the hardware with gui interface, and elastix give me this:
Port 1: TE-mode BRI S/T interface line (for phone lines)
-> Protocol: DSS1 (Euro ISDN)
-> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib.
-> childcnt: 2
* Port NOT useable for PBX (maybe there is already a PBX running?)
Now when i reboot the server elastix gives me the error on the console screen:
mdl_error|req(tei_12)
I dont know what the hell is this.
I keep configure the card doing the:
misdn scan
misdn config
misdn start
Changed the link to point to mutipoint, my line is point to multipoint.
and than edit the etc/asterisk/misdn.conf:
; adding the postfix 'ptp' to a port number is obsolete now, chan_misdn
; parses /etc/misdn-init.conf and sets the ptp mode to the corresponding
; configs. For backwards compatibility you can still set ptp here.
;
ports=1
[first_extern]
; again port defs
ports=1
; again a context for incoming calls
context=Extern1
; msns for te ports, listen on those numbers on the above ports, and
; indicate the incoming calls to asterisk
; here you can give a comma separated list or simply an '*' for
; any msn.
msns=*
; here an example with given msns
[second_extern]
ports=1
context=from-pstn
callerid=15
msns=*
and i changed the things that are underline
and than
i make asterisk -r
misdn show stacks
and give me this:
Connected to Asterisk 1.4.26.1 currently running on elastix (pid = 6169)
Verbosity is at least 3
elastix*CLI> misdn show stacks
BEGIN STACK_LIST:
* Port 1 Type TE Prot. PMP L2Link DOWN L1Link:DOWN Blocked:0 Debug:0
elastix*CLI>
Can someone help me here open vox people
Is the card that is malfuncioning or is missing some configuration
Hope someone could help me here
thanks in advanced.
hi:
what is the error:
=========================
Protocol: DSS1 (Euro ISDN)
-> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib.
-> childcnt: 2
* Port NOT useable for PBX (maybe there is already a PBX running?)
=========================
something is wrong here. by the way, after load the drivers, run : dmesg, do you see any errors?
from asterisk console, the layer1 and layer 2 are down, please double the physical connection.
or if still can not solve, you MUST give ssh to check that.
i dont know what happen but now its runing smoth i can make calls and receive inbound rotes , it´s fully working . i just changed the trunk to mISDN/1/$OUTNUM$ and i have
mISDN/g:isdn/$OUTNUM$ and in console run asterisk -r. i dont know what was wrong.
But now is fully working. if someone could tell me what happen i really appreciate.
thanks in advanced