keywords:pbx ip pbx voip gateway gsm gateway

× Questions about B100/200/400/800 ISDN BRI Cards

B100P under Trixbox 2.8

8 years 6 months ago #6653 by callmeknud
Hello,

i tried installing the B100P under Trixbox 2.8. However i didn't manage to get it working.

msdnportinfo result:
Port 1: TE-mode BRI S/T interface line (for phone lines)
-> Protocol: DSS1 (Euro ISDN)
-> childcnt: 2
misdn-init scan result:
[OK] found the following devices:
card=1,hfcpci

rc.local:
touch /var/lock/subsys/local
/usr/sbin/misdn-init start
/usr/sbin/amportal start
chmod 755 /usr/local/sbin/motd.sh && /usr/local/sbin/motd.sh > /etc/issue


Running "misdn show stacks" in Asterisk CLI results in Command not found.

The Asterisk Log also lists following error:

[Feb 22 10:28:42] WARNING[2988] loader.c: Error loading module 'chan_misdn.so':/usr/lib/asterisk/modules/chan_misdn.so: undefined symbol:__ast_string_field_index_build

[font="][Feb22 10:28:42] WARNING[2988] loader.c: Module 'chan_misdn.so' could not beloaded.

thanks in advance!
[/font]
8 years 6 months ago #6656 by Denins.Den
1.Individually add these symbolic links:
ln -s /usr/lib/libisdnnet.so /usr/lib/libisdnnet.so.0
ln -s /usr/lib/libmISDN.so /usr/lib/libmISDN.so.0
ln -s /usr/lib/libsuppserv.so /usr/lib/libsuppserv.so.0

2.Edit rc.local script to start mISDN:
vi /etc/rc.d/rc.local
add the command:
/usr/sbin/mISDN start
before the line:
/usr/sbin/amportal start

3.Save and reboot your trixbox to check everything is working as expected.
8 years 6 months ago #6663 by callmeknud
Hello,

Thank you very much for your answer.

However the Problem persists.

Do you have any other Advice?

thanks!
8 years 6 months ago #6666 by Denins.Den
Please give me the SSH, so i can login in to your system to check.
8 years 5 months ago #6683 by callmeknud
Hello,

i sent you my SSH Info, could you please contact we when you'll have time to connect?

Thank you!
8 years 5 months ago #6685 by Denins.Den
Sorry for the delay reply, i have tried to connect to your system, but unlucky it failed, i want to know whether your SSH port is 22,
Please check it.
Time to create page: 0.026 seconds
Powered by Kunena Forum