×
Notice
The forum is in read only mode.
Forum
Telephony Cards Support
B100/200/400/800 Series
B100P under Trixbox 2.8
×
Questions about B100/200/400/800 ISDN BRI Cards
B100P under Trixbox 2.8
13 years 1 month ago #6687
by callmeknud
Hello,
sorry the PC was down, could you please try again?
Thank you!
Less
More
Posts: 4
Thank you received: 1
13 years 1 month ago #6694
by callmeknud
Hello,
i have to apologize, there has been an internal fault in port forwarding which we have fixed now. Sorry for that!
May I ask you to please try again?
Thanks in advance!
Less
More
Posts: 4
Thank you received: 1
13 years 1 month ago #6697
by Denins.Den
I just check your system, and found in /usr/lib/, miss some file:
/usr/lib/libisdnnet.so
/usr/lib/libmISDN.so
/usr/lib/libsuppserv.so
There are only "lrwxrwxrwx 1 root root 19 Feb 22 09:50 /usr/lib/libisdnnet.so.0 -> libisdnnet.so.0.0.0"
If your trixbox is new installed, i suggest you that reinstall trixbox again, and i will configure this card for you.
13 years 1 month ago #6698
by callmeknud
that is very kind!
Trixbox is now installed again.
SSH Login is the same.
Thanks!
Less
More
Posts: 4
Thank you received: 1
13 years 1 month ago #6700
by Denins.Den
misdn is loaded by asterisk now, please check:
trixbox1*CLI> misdn show stacks
BEGIN STACK_LIST:
* Port 1 Type TE Prot. PMP L2Link DOWN L1LinkOWN Blocked:0 Debug:0
Forum
Telephony Cards Support
B100/200/400/800 Series
B100P under Trixbox 2.8
Time to create page: 0.041 seconds