× Questions about B100/200/400/800 ISDN BRI Cards

B100P freePBX and DAHDI

6 years 11 months ago #8128 by kerrywales
I am just setting up a freePBX box (2.10) on centos with
asterisk 1.8

The documentation implies that all I need do is configure DAHDI to get my B100P working!!!

lspci shows the card there.
dahdi show channels shows nothing
dahdi_scan simply returns the command prompt.

I am obviously missing something. I didn't think I needed to recompile the kernel for this card with the new version. Am I wrong?

If so where do I look to try.

Thanks

Kerry
6 years 11 months ago #8129 by chunlei.yi
hi,
please add this line "#include dahdi-channels.conf" in the file chan_dahdi.conf, then run the following command in turn
modprobe dahdi
modprobe zaphfc (TE模式)
dahdi_genconf
dahdi_cfg –vvv
please confirm that it can show the channels rightly,more detail you can refer to the user manual
downloads.openvox.cn/pub/manuals/V2.2/En...AHDI_User_Manual.pdf
if still have problem, please contact me via msn
msn:chunlei.yi@hotmail.com
6 years 11 months ago #8130 by kerrywales
I have tried what you suggest but it tells me that zaphfc is missing. I have tried to google info on it but the hits have not been helpful so far.
I have email you seperately.

Regards
6 years 11 months ago #8133 by chunlei.yi
hi,
which version of your dahdi? do you patch for it? please use the following version to try and it don't need a patch
downloads.openvox.cn/pub/drivers/dahdi-l...5.0.1+2.5.0.1.tar.gz
if still have problem,please send ssh to my email, i will help you to check it
email : This email address is being protected from spambots. You need JavaScript enabled to view it.
Time to create page: 0.027 seconds
Powered by Kunena Forum