- Thank you received: 0
×
Questions about B100/200/400/800 ISDN BRI Cards
BE200P in NT mode. tick tack sound
11 years 9 months ago #8199
by altoas
Hi,We are using BE200P card with asterisk 1.8 and DAHDI.
both ports are in NT mode, connected to ISDN PBX ERICSSON
DAHDI is from your site, latest version.
The first error is:
And the major problem by now is that when call is in progress we hear a sound like a clock is ticking every second and it is annoying.
here is system.conf
chan_dahdi.conf
What can we do to stop the annoying sound?
Another error when receiving incoming call is:
I cannot provide SSH, the system is behind firewalls in military org.
I have skype and email or here for additional info.
both ports are in NT mode, connected to ISDN PBX ERICSSON
DAHDI is from your site, latest version.
The first error is:
[2012-07-10 13:32:14] NOTICE[4370] chan_dahdi.c: PRI got event: HDLC Abort (6) on D-channel of span 1
[2012-07-10 13:32:14] NOTICE[4371] chan_dahdi.c: PRI got event: HDLC Abort (6) on D-channel of span 2
[2012-07-10 13:32:14] NOTICE[4371] chan_dahdi.c: PRI got event: HDLC Abort (6) on D-channel of span 2
[2012-07-10 13:32:14] NOTICE[4371] chan_dahdi.c: PRI got event: HDLC Abort (6) on D-channel of span 2
[2012-07-10 13:32:14] NOTICE[4371] chan_dahdi.c: PRI got event: HDLC Abort (6) on D-channel of span 2
[2012-07-10 13:32:14] NOTICE[4371] chan_dahdi.c: PRI got event: HDLC Abort (6) on D-channel of span 2
[2012-07-10 13:32:14] NOTICE[4371] chan_dahdi.c: PRI got event: HDLC Abort (6) on D-channel of span 2
[2012-07-10 13:32:14] NOTICE[4371] chan_dahdi.c: PRI got event: HDLC Abort (6) on D-channel of span 2
[2012-07-10 13:32:14] NOTICE[4371] chan_dahdi.c: PRI got event: HDLC Abort (6) on D-channel of span 2
[2012-07-10 13:32:14] NOTICE[4371] chan_dahdi.c: PRI got event: HDLC Abort (6) on D-channel of span 2
And the major problem by now is that when call is in progress we hear a sound like a clock is ticking every second and it is annoying.
here is system.conf
# Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS span=1,0,0,ccs,ami# termtype: ntbchan=1-2hardhdlc=3
# Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS span=2,0,0,ccs,ami# termtype: ntbchan=4-5hardhdlc=6
# Global data
loadzone = bgdefaultzone = bgchan_dahdi.conf
[trunkgroups]
[channels]language=bgswitchtype=qsig
pridialplan=dynamicprilocaldialplan=dynamicinternationalprefix = 00nationalprefix = 0;localprefix = VORWAHLprivateprefix = 5unknownprefix =
overlapdial=yesfacilityenable = yesusecallerid=yescallwaiting= yesusecallingpres=yescallwaitingcallerid=yesthreewaycalling=yestransfer=yescanpark=yescancallforward=yescallreturn=yesimmediate=noechocancel=yesechocancelwhenbridged=yesechotraining=yescallgroup=1pickupgroup=1mohinterpret=defaultmohsuggest=default
; p2p TE mode => bri_cpe; p2mp TE mode => bri_cpe_ptmp; p2p NT mode => bri_net; p2mp NT mode => bri_net_ptmp
;group = 1;context=TE1;signalling = bri_cpe_ptmp;channel => 1-2
;group = 2;context=TE2;signalling = bri_cpe_ptmp;channel => 4-5
;group = 3;context=NT1;signalling = bri_net_ptmp;channel => 7-8
;group = 4;context=NT2;signalling = bri_net_ptmp;channel => 10-11
#include dahdi-channels.conf; Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS group=0,11context=from-pstnswitchtype = qsigsignalling = autooverlapdial => yeschannel => 1-2context = from-internalgroup = 63
; Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS group=0,12context=from-pstnswitchtype = qsigoverlapdial => yessignalling = autochannel => 4-5context = from-internalgroup = 63What can we do to stop the annoying sound?
Another error when receiving incoming call is:
PRI Span: 1 !! Unknown IE 49 (cs5)
PRI Span: 2 !! Unknown IE 49 (cs5)
PRI Span: 2 !! Unknown IE 49 (cs5)
PRI Span: 1 !! Unknown IE 49 (cs5)
PRI Span: 1 !! Unknown IE 49 (cs5)
PRI Span: 2 !! Unknown IE 49 (cs5)
PRI Span: 2 !! Unknown IE 49 (cs5)
PRI Span: 1 !! Unknown IE 49 (cs5)
PRI Span: 1 !! Unknown IE 49 (cs5)
PRI Span: 2 !! Unknown IE 49 (cs5)
PRI Span: 1 !! Unknown IE 49 (cs5)
PRI Span: 2 !! Unknown IE 49 (cs5)
I cannot provide SSH, the system is behind firewalls in military org.
I have skype and email or here for additional info.
- chunlei.yi
-
- Offline
- Moderator
-
Less
More
- Posts: 26
- Thank you received: 4
11 years 9 months ago #8201
by chunlei.yi
hi,
please confirm the card don't have interrupt sharing then start the irqbalance service
run "dahdi_genconf" command to generate configuration again to try
you can add my skype and contact me when you are online, i will help you to check it
skype:chunlei.yi
email:[email protected]
please confirm the card don't have interrupt sharing then start the irqbalance service
run "dahdi_genconf" command to generate configuration again to try
you can add my skype and contact me when you are online, i will help you to check it
skype:chunlei.yi
email:[email protected]
11 years 9 months ago #8206
by altoas
BOOT_IMAGE=/boot/vmlinuz-3.2.0-26-generic root=UUID=ef49bd8b-3375-4439-a7c1-3acecd92cf57 ro quiet splash vt.handoff=7
root@OptiPlex-GX280:/etc/dahdi# cat /proc/interrupts
CPU0
0: 52 IO-APIC-edge timer
1: 3 IO-APIC-edge i8042
7: 1 IO-APIC-edge parport0
8: 1 IO-APIC-edge rtc0
9: 0 IO-APIC-fasteoi acpi
12: 4 IO-APIC-edge i8042
14: 285 IO-APIC-edge ata_piix
15: 0 IO-APIC-edge ata_piix
16: 1548 IO-APIC-fasteoi eth0
17: 212637 IO-APIC-fasteoi b4xxp
18: 0 IO-APIC-fasteoi uhci_hcd:usb4
20: 7105 IO-APIC-fasteoi ata_piix
21: 64 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2
22: 35 IO-APIC-fasteoi uhci_hcd:usb3
23: 0 IO-APIC-fasteoi uhci_hcd:usb5, snd_intel8x0
43: 305 PCI-MSI-edge radeon
NMI: 2 Non-maskable interrupts
LOC: 20697 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 2 Performance monitoring interrupts
IWI: 0 IRQ work interrupts
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
MCE: 0 Machine check exceptions
MCP: 1 Machine check polls
ERR: 0
MIS: 0
# Autogenerated by /usr/sbin/dahdi_genconf on Thu Jul 12 13:05:09 2012
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS
span=1,0,0,ccs,ami
# termtype: nt
bchan=1-2
hardhdlc=3
# Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS
span=2,0,0,ccs,ami
# termtype: nt
bchan=4-5
hardhdlc=6
# Global data
loadzone = bg
defaultzone = bg
dahdi_genconf sets the clock source as local (Master) but the remote side is currently the master, so I manually correct it to be:
# Autogenerated by /usr/sbin/dahdi_genconf on Tue Jul 10 11:30:16 2012
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS
span=1,1,0,ccs,ami
# termtype: nt
bchan=1-2
hardhdlc=3
# Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS
span=2,2,0,ccs,ami
# termtype: nt
bchan=4-5
hardhdlc=6
# Global data
loadzone = bg
defaultzone = bg
and in also dahdi_channels.conf signalling must be auto, bri_net or bri_net_ptmp doesn't work.
; Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS
group=0,11
context=from-pstn
switchtype = qsig
signalling = auto
rxgain=0
txgain=0
resetinterval=never
overlapdial => yes
channel => 1-2
context = from-internal
group = 63
; Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS
group=0,12
context=from-pstn
switchtype = qsig
overlapdial => yes
rxgain=0
txgain=0
resetinterval=never
signalling = auto
channel => 4-5
context = from-internal
group = 63
root@OptiPlex-GX280:/etc/dahdi# cat /proc/interrupts
CPU0
0: 52 IO-APIC-edge timer
1: 3 IO-APIC-edge i8042
7: 1 IO-APIC-edge parport0
8: 1 IO-APIC-edge rtc0
9: 0 IO-APIC-fasteoi acpi
12: 4 IO-APIC-edge i8042
14: 285 IO-APIC-edge ata_piix
15: 0 IO-APIC-edge ata_piix
16: 1548 IO-APIC-fasteoi eth0
17: 212637 IO-APIC-fasteoi b4xxp
18: 0 IO-APIC-fasteoi uhci_hcd:usb4
20: 7105 IO-APIC-fasteoi ata_piix
21: 64 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2
22: 35 IO-APIC-fasteoi uhci_hcd:usb3
23: 0 IO-APIC-fasteoi uhci_hcd:usb5, snd_intel8x0
43: 305 PCI-MSI-edge radeon
NMI: 2 Non-maskable interrupts
LOC: 20697 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 2 Performance monitoring interrupts
IWI: 0 IRQ work interrupts
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
MCE: 0 Machine check exceptions
MCP: 1 Machine check polls
ERR: 0
MIS: 0
# Autogenerated by /usr/sbin/dahdi_genconf on Thu Jul 12 13:05:09 2012
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS
span=1,0,0,ccs,ami
# termtype: nt
bchan=1-2
hardhdlc=3
# Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS
span=2,0,0,ccs,ami
# termtype: nt
bchan=4-5
hardhdlc=6
# Global data
loadzone = bg
defaultzone = bg
dahdi_genconf sets the clock source as local (Master) but the remote side is currently the master, so I manually correct it to be:
# Autogenerated by /usr/sbin/dahdi_genconf on Tue Jul 10 11:30:16 2012
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS
span=1,1,0,ccs,ami
# termtype: nt
bchan=1-2
hardhdlc=3
# Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS
span=2,2,0,ccs,ami
# termtype: nt
bchan=4-5
hardhdlc=6
# Global data
loadzone = bg
defaultzone = bg
and in also dahdi_channels.conf signalling must be auto, bri_net or bri_net_ptmp doesn't work.
; Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS
group=0,11
context=from-pstn
switchtype = qsig
signalling = auto
rxgain=0
txgain=0
resetinterval=never
overlapdial => yes
channel => 1-2
context = from-internal
group = 63
; Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS
group=0,12
context=from-pstn
switchtype = qsig
overlapdial => yes
rxgain=0
txgain=0
resetinterval=never
signalling = auto
channel => 4-5
context = from-internal
group = 63
- chunlei.yi
-
- Offline
- Moderator
-
Less
More
- Posts: 26
- Thank you received: 4
11 years 9 months ago #8207
by chunlei.yi
hi,
please add my skype or msn and contact me when you are online
skype:chunlei.yi
msn:[email protected]
please add my skype or msn and contact me when you are online
skype:chunlei.yi
msn:[email protected]
- chunlei.yi
-
- Offline
- Moderator
-
Less
More
- Posts: 26
- Thank you received: 4
Time to create page: 0.045 seconds