Hi, I am trying to install B400p card with Misdn driver,
i notice the manual used is asterisk 1.4.11, I want to know does openvox patch hfc_multi.c applies to other asterisk version as well like asterisk 1.2.X and zaptel 1.2.X ?
Hi, james, I have managed to install B410P card with misdn driver with asterisk 1.2.24.
However I am not sure how to configure the misdn driver. I notice that for Digium card they start misdn driver by /etc/init.d/misdn-init scan/config/start. and they have files in /etc/init.d/misdn-init.conf
But for Openvox B410p card we use /usr/sbin/mISDN scan/config/start, and we have files in /etc/mISDN.conf.
Can you tell me the difference or either of them is fine to fun?
and could you also post the files /etc/asterisk/misdn.conf for Openvox B410p card?
hello, you have to replace the hfc_multi.c for B400P. the mISDN is mISDN-1_1-2. you run the mISDN scan, mISDN config and mISDN start. it will generate mISDN.conf for you. the conf is shown in the user manual(
). you also can refer with misdn.org.
hi, james, thank you for your fast response, your support is really good. After applying the patch and installing misdn driver, I have made a mistake and apply /etc/init.d/misdn-init scan/config/start.
After that I notice it's not for B400P card, so I apply mISDN /scan/config/start, again. Does it matter?
Below is my server /etc/asterisk/misdn.conf/. could you please check for me:
; Users sections
far_alerting=no ; generate ringing for chan_sip and others
rxgain=0 ; between -8 and 8
te_choose_channel=yes ; some need to set to yes
immediate=no ; change to yes if no MSN or DDI numbers