keywords:pbx ip pbx voip gateway gsm gateway

× Questions about B100/200/400/800 ISDN BRI Cards

b400 and fastweb

11 years 7 months ago #687 by mauro
I've a problem with isdn fastweb and b400 card.
With nt or nt+ telecom, asterisk working Properly, but not with fastweb.

Help me.
11 years 7 months ago #688 by james.zhu
hello, if your card can not work, please post the configs and logs. give us details, please!
regards,
zhu

11 years 7 months ago #689 by mauro
hello
my card work properly with telecom isdn nt1 and nt1+, but not with fastweb

/etc/misdn-init.conf

te_ptmp=1,2,3
nt_ptp=4
.............

/etc/asterisk/misdn.conf

[general]
misdn_init = /etc/misdn-init.conf
debug = 0
bridging = yes
stop_tone_after_first_digit = yes
append_digits2exten = yes
dynamic_crypt = no
crypt_prefix =
crypt_keys =

[default]
language = it

[italiacom]
ports = 1,2,3,4
context = from-trunk
msns = *
echocancel = no
overlapdial = no
senddtmf = yes
far_alerting = yes
te_choose_channel = no
dialplan = 0
localdialplan = 0
cpndialplan = 0
nationalprefix = 0
internationalprefix = 00
rxgain = 0
txgain = 0


Thanks

Mauro
11 years 7 months ago #690 by james.zhu
hello, the confis are ok. i am not sure what is fastweb? please tell me the fastweb?
regards,
james.zhu

11 years 7 months ago #691 by mauro
FAstweb is operator isp fibre channel.
In my office operate with cisco on a board card isdn bri dual chanell
mauro
11 years 7 months ago #694 by james.zhu
hi:
as long as you plug the cable into S/T interface, the connections should be established.
Regards,
James.zhu

Time to create page: 0.024 seconds
Powered by Kunena Forum