Need help for B200M

How can we test that the card is working?

I don't know if it is working. The leds don't work.
I have everything in TE mode and have everything in NT mode doesn't work.
I have the additional power supply.

Is the power supply needed to let the B200M work? I have connected it but the card doesn't seem to work.

It is however recognized by askozia. When I try to make a call to the isdn number I get no answer signal.

1.In TE MODE,the additional Power supply is not needed. it only use in NT MODE.


[quote:268fd84b49="osa2"]How can we test that the card is working?

I don't know if it is working. The leds don't work.
I have everything in TE mode and have everything in NT mode doesn't work.
I have the additional power supply.

Is the power supply needed to let the B200M work? I have connected it but the card doesn't seem to work.

It is however recognized by askozia. When I try to make a call to the isdn number I get no answer signal.[/quote]

I have removed all the 4 jumpers who need to be open.
And now everything works.
Strange because on default you ship them in a configuration where the are open but the outer 2 are conected.

Is there a way to make an analoge signal for an alarm system/ fax line?

Best regards

what is your system? still askozia? you have to use spandsp or some other package to make it works.
regards!
James.zhu

If the line is analoge interface, A400m is suitable.

[quote:8b2d1b5683="osa2"]I have removed all the 4 jumpers who need to be open.
And now everything works.
Strange because on default you ship them in a configuration where the are open but the outer 2 are conected.

Is there a way to make an analoge signal for an alarm system/ fax line?

Best regards[/quote]

HI
I have the same problem

Askozia recognize 4 ISDN port and not only 2 and nothing is working.

any idea?

thanks
Moreno