B400P - Help

Hello people

I'm really fresh in asterisk, but I'm trying to do my best, so here go.

I was installing a b400p in my server and i made it work with the briSTUFF driver, and until now, it's very stable. But there's some problems:

First - All the leds are off, and I try everything, but nothing work.

Second - I cant change anything on zaptel.conf, when I do this, the asterisk do not recognize the card. So, I'm in Europe and I read here http://www.voip-info.org/wiki-Asterisk+config+zaptel.conf that I need to configure like this:
span=X,X,0,ccs,hdb3,crc4
And if I enable the TE mode the same thing happen.

So, when I really need a PTP conection or TE ou NT.. It will work?

Anyway, I appreciate any tips to help-me on this job.


Here is my zaptel.conf:
# Span 1: ztqoz/1/1 "quadBRI PCI ISDN Card 1 Span 1 [TE]" (MASTER)
span=1,1,0,ccs,ami
#termtype: te
bchan=1-2
dchan=3

# Span 2: ztqoz/1/2 "quadBRI PCI ISDN Card 1 Span 2 [TE]"
span=2,2,0,ccs,ami
#termtype: te
bchan=4-5
dchan=6

# Span 3: ztqoz/1/3 "quadBRI PCI ISDN Card 1 Span 3 [TE]"
span=3,3,0,ccs,ami
#termtype: te
bchan=7-8
dchan=9

# Span 4: ztqoz/1/4 "quadBRI PCI ISDN Card 1 Span 4 [TE]"
span=4,4,0,ccs,ami
#termtype: te
bchan=10-11
dchan=12

# Global data

loadzone = pt
defaultzone = pt

And my zapata.conf
channels]

; Span 1: ztqoz/1/1 "quadBRI PCI ISDN Card 1 Span 1 [TE]" (MASTER)
group=0,11
context=cham-entra
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 1-2
usecallerid=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
priindication=outofband
rxgain=0.0
txgain=0.0

; Span 2: ztqoz/1/2 "quadBRI PCI ISDN Card 1 Span 2 [TE]"
group=0,12
context=cham-entra
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 4-5

; Span 3: ztqoz/1/3 "quadBRI PCI ISDN Card 1 Span 3 [TE]"
group=0,13
context=cham-entra
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 7-8

; Span 4: ztqoz/1/4 "quadBRI PCI ISDN Card 1 Span 4 [TE]"
group=0,14
context=cham-entra
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 10-11


Cheers..

Guto

hello,
you must patch it for OpenVox cards.
regards!
James.zhu

Sorry for the late...

Is there some tutorial teaching how to patch?
Where I can find it?

Tanks

Guto

hello:
if you are using bristuff, you must patch that to make it works.
we use Bristuff version: bristuff-0.3.0-PRE-1y-j as an example, please make sure that you use same version as you installed.
if you are not sure the procedures, please read this:
openvox.com.cn/downloadsFile/B200P%20B40...-Manual-bristuff.pdf
and download the driver to replace the file(qozap.c)
openvox.com.cn/downloadsFile/1194509266.c .
and recompile that.
regards!
James.zhu

Tanks for the answer James.

I do al the procedures according to the manual, but the leds on the card keep turned off all the time.
How can I fix it?

Im using Asterisk 1.4.21.1
And Bristuff 0.4.0-RC3b

hello:
please email your ssh account to me. my email : This email address is being protected from spambots. You need JavaScript enabled to view it.
regards!
James.zhu