B200 don't work

hello
i have installed one openvox a1200p and one openvox b200 this is response by lspci
"01:09.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
01:0a.0 Multimedia video controller: Gammagraphx, Inc. Unknown device 0400 (rev 08)"

without openvox a1200p
"01:0a.0 Ethernet controller: Gammagraphx, Inc. Unknown device 0400 (rev 08)"

what is the problem?
thanks
best regards dario
P.S. excuse for my orrible english

hello,
please show the full message of lspci -vvvvvvvvvvvvvv. it should show:
communication controller and isdn controller for a1200 and b200. if it does not show those info, please check the PCI Slots or change to other slots and try again.
regards!
James.zhu

hello
this is the output of lspci:
01:09.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interfa
ce
Subsystem: Unknown device 9519:0003
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping
- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <M
Abort- >SERR- <PERR-
Latency: 96 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 145
Region 0: I/O ports at b800
Region 1: Memory at cfdff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA PME(D0+,D1-,D2+,D3hot+,D
3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:0a.0 Multimedia video controller: Gammagraphx, Inc. Unknown device 0400 (rev 08)
Subsystem: Unknown device 002c:0400
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping
- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAb
ort- >SERR- <PERR-
Latency: 0 (1000ns max), Cache Line Size: 48 bytes
Region 0: Memory at <ignored> (32-bit, non-prefetchable) [disabled]
Region 1: Memory at <ignored> (64-bit, non-prefetchable) [disabled]
Region 3: Memory at <ignored> (64-bit, prefetchable) [disabled]
Region 5: Memory at <invalid-64bit-slot> (64-bit, non-prefetchable) [disable
d]
Expansion ROM at <ignored> [disabled]
i have installed mISDN and the a1200p don't work
i have changed slot pci without result

thanks for your aid
regards Dario

hello,
please check it again, the system seems does not detect B200P. there is no B200P information in your system. if still can not find that, please give me your ssh account. my email: This email address is being protected from spambots. You need JavaScript enabled to view it.
regards!
James.zhu