We have installed your B200E card on a Jetway NC92 N230 with AsteriskNow 1.0.2 and mISDN-1_1_7. This driver does not initialize the card because the IOPORTS region is not accessible and IOMEM region is disabled.
If we install it on Dell server and mISDN initializes the card. The led are lighting.
It is not possible to use a Dell Server because it is too big. It is necessary a mini-ITX box. We use an other Realtek Lan card. It is running and it utilizes the IOMEM region.
You are right, I am indeed a B200P. In my message, I put the E in thinking about the echocancelor. The card is in PCI format and settled on the PCI slot of the Jetway NC92-LF-230. After updating the bios of the motherboard, the driver loads and mISDN recognizes the card. In standard, if the driver is loaded, the led are red and blink, but in our case they are fixed red. I do not understand what that means. The documentation Openvox does not say anything about it.
This is where I am now. I still can not establish a link with my ISDN access.