keywords: ip pbx voip gateway gsm gateway

× Questions about B100/200/400/800 ISDN BRI Cards

DAHDI suppor for all B OpenVox cards & A1200P/1800P

13 years 8 months ago #3131 by Jose
Hi all!

If you want to install dahdi with asterisk 1,4,24 & support all bri OpenVox cards & analogic A1200P/1800P, you can try our stuff.

You can download from here.

svn export -–username guest -–password guest

Here you have four folders libpri-1.4.9 dahdi-linux dahdi-tools- asterisk 1.4.24 & asterisk-addons 1.4.7

Just compile them in the usual way and you can work with B100P, B200P, B400P, B800P, A800P & A1200P on dahdi

It's patched for all OpenVox stuff I own, so you only have to download & install from SVN.

Tested on kernels form 2.6.18 to 2.6.27 (32 & 64 bits)

Best Regards.

Note. This is a asterisk-es-rsp group work. We've tried to have a SVN with all what we need for work without troubles. Thanks to James for all help in B series support.
13 years 8 months ago #3132 by james.zhu
do a good job! i suggest you posting the url link to and
it will be good to all of users.

13 years 8 months ago #3133 by Jose
B100P in hardhdlc mode as wcbxxp driver
B200P / B400P / B800P
and lots of minor fixes using 1.4.24 stable release

next week I'll give a try to B100P leds

If you have any suggestion or question please make me know

If you have Dchannel up / down events and it gets locked add resetinterval=never to chan_dahdi.conf in channels section
if you dont want to see Dchan span messages add bri_l1_check=0 ( spelled as bri L one) too

When I finish with all stuff I hope I can give a little help to make it go into Elastix and translate a good install manual for CentOs & Fedora (I'm using Fedora 10 x64 and all compiles & works fine on kernel 2.6.27)

13 years 8 months ago #3134 by james.zhu
hello, jose:
OpenVox b100p does not support leds in hardware design, please take a note for that.

13 years 8 months ago #3141 by Jose

Nothing to do left then. Further tests.

13 years 8 months ago #3257 by reinerotto

any plans for asterisk 1.6.x ?
Actually I am using A400P on 1.6.1, OpenSuSE 11.1 with a "Small Trick" (edit /etc/init.d/asterisk; compile asterisk 1.6.1 and dahdi from source) successfully.
However, the big advantage would be also to use a B100P with 1.6.1/dahdi.
Actually, I use a basic AVM-card for ISDN-connection, on asterisk with OpenSUE 10.3, but not so easy to integrate. Because asterisk 1.6.1 already includes some BRI-support, a B100P should be much better way. Should be a great great sales argument for OpenVox, too :-)
Same valid for all Bx00P-cards, of course.
Time to create page: 0.045 seconds
Powered by Kunena Forum