DAHDI suppor for all B OpenVox cards & A1200P/1800P

Hi!
thank's for your great work!

I have installed all your package, and I have a B200P card. Where I can find some info to configure the card with dadhi tools?
Because the tutorial are for mISDN or bristuff

Thank you

hello,
we do not have any doc for that version, you can refer the link from:
https://issues.asterisk.org/view.php?id=13897
regards!
james.zhu

Hi
I have some problem

I make the following step:
- dahdi-linux-2.1.0.4: make && make install
- dahdi-tools-2.1.0.2: ./configure && make && make install
- edited /etc/dahdi/modules commented all except wcb4xxp module (for b200p)
- libpri-1.4.9: make && make install
- asterisk-1.4.24: ./configure && make && make install && make samples
- asterisk-addons-1.4.7: ./configure && make install && make samples

but if i try to run asterisk I obtain:

root@serverasterisk:/usr/src/Odicha/asterisk-1.4.24# asterisk -vvvvvvvvgc
Asterisk 1.4.24, Copyright (C) 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer <This email address is being protected from spambots. You need JavaScript enabled to view it.>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
== Parsing '/etc/asterisk/asterisk.conf': Found
== Parsing '/etc/asterisk/extconfig.conf': Found
Unable to open pid file '/var/run/asterisk/asterisk.pid': No such file or directory
Unable to bind socket to /var/run/asterisk/asterisk.ctl: No such file or directory
== Parsing '/etc/asterisk/logger.conf': Found
Asterisk Event Logger Started /var/log/asterisk/event_log
[Jun 1 11:18:31] ERROR[5921]: asterisk.c:3078 main: Asterisk has detected a problem with your DAHDI configuration and will shutdown for your protection. You have options:
1. You only have to compile DAHDI support into Asterisk if you need it. One option is to recompile without DAHDI support.
2. You only have to load DAHDI drivers if you want to take advantage of DAHDI services. One option is to unload DAHDI modules if you don't need them.
3. If you need Zaptel services, you must correctly configure DAHDI.


Any idea?

thank's

hello,
make sure the permission for root, make sure you have compiled dahdi correctly.
regards!
Jamesz.hu

@Jose

you wrote: "B100P in hardhdlc mode as wcbxxp driver"
Does this mean you patched the wcb4xxp to run with B100P (hfc-s chip)?
or does it use the (v)zaphfc for B100P (hfc-s chip)

what is the difference with the patches for generic HFC-4S cards from:
https://issues.asterisk.org/view.php?id=13897
They are also for the (hfc-4s) openvox cards?

It uses vzaphfc basis. Rewritten a lot of code for support dahdi hardhdlc mode. So It doesn't needs further patchs in asterisk 1.6.x

2.1.0.4 version at http://asterisk-es-rsp.irontec.com/svn/branches/ ( all BxxxP cards from OpenVox plus A800P/1200P) (only enabling dahdy_dummy if ther is not timing source)

2.2.0.2 version at http://asterisk-es-rsp.irontec.com/svn/team/Odicha/unstable/ (if you use these one you don't need to enable nothing for make it work) (one week working with no errors...)