keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about B100/200/400/800 ISDN BRI Cards

DTMF - mISDN - B100P - POTS

14 years 5 months ago #4104 by optix
Hi all,

I have a B100P card with mISDN driver installed on my Asterisk (1.4.24). Card is working properly, I can make inbound and outbound calls etc.

Problem is DTMF recognition (for IVR) from POTS lines. Whatever option I try, I can't get this thing to work. However DTMF works just fine when incoming calls are made from other ISDN or GSM network.

Current config:
/etc/mISDN.conf
<mISDNconf>
        <module poll="128" debug="0" timer="no">hfcmulti</module>
        <module debug="0" options="0">mISDN_dsp</module>
        <devnode user="asterisk" group="asterisk" mode="660">mISDN</devnode>
        <card type="hfcpci" dtmf="yes">
                <port mode="te" link="ptmp">1</port>
        </card>
</mISDNconf>
/etc/misdn-init.conf
...
card=1,hfcpci,dtmf
...
dtmfthreshold=100
I've tried with different threshold values (20,50,70,200,350,500), but no luck.. :(

Any help?
Thanks!
14 years 5 months ago #4105 by Robert
hello
Please try to add one line like the following:
relaxdtmf=yes
in misdn.conf file.
14 years 5 months ago #4108 by optix
I did, but it stays the same. Still not getting dtmf from pots.

After I make changes, I restart asterisk and mISDN service (service mISDN restart, serivce asterisk restart). Hope I'm not missing out anything there?


Thanks

i] Last edited by optix at 2009-11-8 17:57 [/i
14 years 5 months ago #4109 by optix
Update...

It works from every other pots line exept the one I'm using for testing - mine :)
Must be something with my phone...
14 years 5 months ago #4120 by Robert
hello
please try to set: card=1,0x4, dtmf
what kind of phone do you use for testing
14 years 5 months ago #4121 by james.zhu
hi:
please give us more details, such as your phone. have you tried to set the dtmfmode with your phone?

Time to create page: 0.040 seconds
Powered by Kunena Forum