URL for Supporting dahdi_B100P B200//400//800P

hi:
this is a SVN trunk from Jose. this "dahdi" version is able to support OpenVox B100P B200//400//800P(using wcb4xxp),
users can try or test that with OpenVox B100P/B200P/B400P/B800P.
please refer this for SVN trunk( http://bbs.openvox.cn/viewthread.php?tid=781& ;extra=page%3D1).
this a updated svn trunk:
Thanks Jose!
===URL===================================================
Dahdi 2.1.0.4

http://asterisk-es-rsp.irontec.com/svn/asterisk-es-rsp/branches/dahdi-linux/2.1.0.4/

http://asterisk-es-rsp.irontec.com/svn/asterisk-es-rsp/branches/dahdi-tools/2.1.0.2/

Dahdi 2.2.0.2

http://asterisk-es-rsp.irontec.com/svn/asterisk-es-rsp/team/Odicha/1_4/dahdi-linux-2.2.0.2/

http://asterisk-es-rsp.irontec.com/svn/asterisk-es-rsp/team/Odicha/1_4/dahdi-tools-2.2.0/


regards!
James.zhu

Hi,

I found that the detection of TE / NT mode in wcb4xxp driver is does not work for B800P.
The only way to setup TE/NT mode for B800P is to setup it manually through module parameters. Attached file is the patch that add te_nt_override parameter. te_nt_override is the bitmap where each bit is 0 for NT mode or 1 for TE mode. Example, if you insert "options wcb4xxp te_nt_override=0xFE" line to the modprobe.conf then it mean that port #1 will work in NT mode and all other ports in TE mode.

Best Regards,
Dmitry