TRIXBOX 2.8 T1 card CAS

Hi guys,

Im using trixbox 2.8 and I was looking for a guide to setup the D110P card for T1 CAS (E&M, Winkstart) and I have found this freindly guide for a Rhino T1 card: http://www.cfcsorlando.com/trixbox-28-rhino-t1-card-em-wink-and-a-legacy-pbx/ , will this setup work using the Openvox card? Im thinking to buy the D110P card but first I want to know is will work for a CAS T1.

Thanks in regard

hello:
yes, it supports CAS. you can edit the zaptel.conf for zaptel or system.conf for dahdi to support that, please refer this link:
http://kb.digium.com/entry/93/
http://www.cadvision.com/blanchas/Asterisk/ConfiguringT1Line.html
regards!
James.zhu

Thanks for the answer James but Im using DAHDI (trixbox 2. instead of Zaptel and the only guide I have found is the one mentioned in the post before but is for a Rhrino card, could this guide work for the D110P T1 card?

Thanks in regard

Any idea......?

hi:
please email your SSH to This email address is being protected from spambots. You need JavaScript enabled to view it.
regards!
james.zhu

Right now I haven't buy the T1 card I just want to know if that guide will work for the card to be sure will work for a CAS T1

i] Last edited by aerodesliza at 2010-1-8 00:33 [/i