keywords: ip pbx voip gateway gsm gateway

× Questions about D-110P 1 Span E1/T1/J1 Interface Card

PRI got event: HDLC Abort (6) on Primary D-channel of span 1

12 years 8 months ago #5466 by [email protected]
is there a way of fixing it....and btw thanks for the help
12 years 8 months ago #5467 by xin.liu
Hi:
If the problem only happens when accessing the disk, then you may have to tune your IDE settings using haparm (see google). Another solution is to replace the motherboard with one from a different company.

12 years 8 months ago #5468 by [email protected]
Would a motherboard of the same brand but with a different chipset solve the problem?
or else...what should i look for in the new motherboard to make sure the problem does not happen again?
12 years 8 months ago #5470 by xin.liu
Hi:
You can try the motherboard of the same brand with a difference chipset.

12 years 8 months ago #5471 by [email protected]
Hi,

Tnx for the feedback. I tried a motherboard with a different chipset but with no success :(

I am trying to do a fresh install and see if i have succes.

Could it be the fact that i use a SATA drive not an IDE that effects the card?
12 years 8 months ago #5473 by [email protected]
Hi,

I tried three different mother boards and now also installed the system an an IDE drive instead of sata. But had no success.
Can anyone help me out pls.
Time to create page: 0.032 seconds
Powered by Kunena Forum