I'm planning to buy a T1 card with hardware echo cancellation to install on Dell T610 server,
is it need to install Hardware echo cancellation? or do not need?
HI,
If you buy the hardware EC module,you should insert the module on the card.
And you only need set echocancel=yes in chan_dahdi.conf or zapata.conf to open it.
But you should comment echocanceller in /etc/dahdi/system.conf or /etc/zaptel.conf.
After that, I suggest you set a simple dialplan for outgoing. Normally, forward to file /etc/asterisk/extensions.conf, and increase these lines below to the end of this file.
[from-internal]
exten=>_X.,1,Dial(dahdi/1/${EXTEN}) // the first 1 means the first priority, and the second means from 1st channel to outside. You can customize which channel you want.
exten=>_X.,n,Hangup