info askozia

I installed the card d110p on askozia, but is not recognized, how can I do?

thanks

---

none0@pci0:0:0: class=0x050000 card=0x03ea1849 chip=0x03ea10de rev=0xa1 hdr=0x00
class = memory
subclass = RAM
isab0@pci0:1:0: class=0x060100 card=0x03e01849 chip=0x03e010de rev=0xa2 hdr=0x00
class = bridge
subclass = PCI-ISA
none1@pci0:1:1: class=0x0c0500 card=0x03eb1849 chip=0x03eb10de rev=0xa2 hdr=0x00
class = serial bus
subclass = SMBus
none2@pci0:1:2: class=0x050000 card=0x03eb1849 chip=0x03f510de rev=0xa2 hdr=0x00
class = memory
subclass = RAM
ohci0@pci0:2:0: class=0x0c0310 card=0x03f11849 chip=0x03f110de rev=0xa3 hdr=0x00
class = serial bus
subclass = USB
ehci0@pci0:2:1: class=0x0c0320 card=0x03f21849 chip=0x03f210de rev=0xa3 hdr=0x00
class = serial bus
subclass = USB
pcib1@pci0:4:0: class=0x060401 card=0x03f31849 chip=0x03f310de rev=0xa1 hdr=0x01
class = bridge
subclass = PCI-PCI
none3@pci0:5:0: class=0x040300 card=0x36621849 chip=0x03f010de rev=0xa2 hdr=0x00
class = multimedia
atapci0@pci0:6:0: class=0x01018a card=0x03ec1849 chip=0x03ec10de rev=0xa2 hdr=0x00
class = mass storage
subclass = ATA
none4@pci0:7:0: class=0x068000 card=0x03ef1849 chip=0x03ef10de rev=0xa2 hdr=0x00
class = bridge
atapci1@pci0:8:0: class=0x010185 card=0x03f61849 chip=0x03f610de rev=0xa2 hdr=0x00
class = mass storage
subclass = ATA
atapci2@pci0:8:1: class=0x010185 card=0x03f61849 chip=0x03f610de rev=0xa2 hdr=0x00
class = mass storage
subclass = ATA
pcib2@pci0:9:0: class=0x060400 card=0x03e81849 chip=0x03e810de rev=0xa2 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib3@pci0:11:0: class=0x060400 card=0x03e91849 chip=0x03e910de rev=0xa2 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib4@pci0:12:0: class=0x060400 card=0x03e91849 chip=0x03e910de rev=0xa2 hdr=0x01
class = bridge
subclass = PCI-PCI
none5@pci0:13:0: class=0x030000 card=0x03d01849 chip=0x03d010de rev=0xa2 hdr=0x00
class = display
subclass = VGA
hostb0@pci0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb1@pci0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb2@pci0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb3@pci0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
class = bridge
subclass = HOST-PCI
none6@pci1:8:0: class=0x028000 card=0x000179fe chip=0x0001e159 rev=0x00 hdr=0x00
class = network
xl0@pci1:10:0: class=0x020000 card=0x100010b7 chip=0x920010b7 rev=0x78 hdr=0x00
class = network
subclass = ethernet

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.3-RELEASE-p2 #1: Mon Aug 18 14:45:15 CEST 2008
[email protected]:/usr/src/sys/i386/compile/ASKOZIAPBX_GENERIC
ACPI APIC Table: <A_M_I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Sempron(tm) Processor LE-1150 (2009.15-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x70ff1 Stepping = 1
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x119<LAHF,ExtAPIC,CR8,Prefetch>
real memory = 939196416 (895 MB)
avail memory = 888938496 (847 MB)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A_M_I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of fec80000, fecc0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xdf6ff000-0xdf6fffff irq 21 at device 2.0 on pci0
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdf6fec00-0xdf6fecff irq 22 at device 2.1 on pci0
usb1: EHCI version 1.0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network> at device 8.0 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xdf7fec00-0xdf7fec7f irq 17 at device 10.0 on pci1
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:76:14:41:64
pci0: <multimedia> at device 5.0 (no driver attached)
atapci0: <nVidia nForce MCP61 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <bridge> at device 7.0 (no driver attached)
atapci1: <nVidia nForce MCP61 SATA300 controller> port 0xc400-0xc407,0xc080-0xc083,0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb88f mem 0xdf6fc000-0xdf6fcfff irq 21 at device 8.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce MCP61 SATA300 controller> port 0xb800-0xb807,0xb480-0xb483,0xb400-0xb407,0xb080-0xb083,0xb000-0xb00f mem 0xdf6f7000-0xdf6f7fff irq 22 at device 8.1 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci5: <ACPI PCI bus> on pcib4
pci0: <display, VGA> at device 13.0 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <Generic IRDA-compatible device> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0
sio0: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio1: configured irq 4 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio1: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcf000-0xcf7ff on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
Timecounter "TSC" frequency 2009153964 Hz quality 800
Timecounters tick every 1.000 msec
usb0: 12Mbps Full Speed USB v1.0
md0: Preloaded image </mfsroot> 20025344 bytes at 0xc09f4ce4
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 9 ports with 9 removable, self powered
usb1: 480Mbps High Speed USB v2.0
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 9 ports with 9 removable, self powered
ad10: 76319MB <MAXTOR STM380215AS 4.AAB> at ata5-master SATA150
Trying to mount root from ufs:/dev/md0
Zapata Telephony Interface Registered on major 196
Echo Canceller: OSLEC
i4bctl: ISDN system control port attached
i4b: ISDN call control device attached
capi: CAPI call control device attached, v2.11
i4btel: 8 ISDN telephony interface device(s) attached
i4bipr: 8 IP over raw HDLC ISDN device(s) attached
i4brbch: 8 raw B channel access device(s) attached
i4btrc: 64 ISDN trace device(s) attached
ztdummy: loaded
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 done
All buffers synced.
Uptime: 5m16s
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.3-RELEASE-p2 #1: Mon Aug 18 14:45:15 CEST 2008
[email protected]:/usr/src/sys/i386/compile/ASKOZIAPBX_GENERIC
ACPI APIC Table: <A_M_I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Sempron(tm) Processor LE-1150 (2009.15-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x70ff1 Stepping = 1
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x119<LAHF,ExtAPIC,CR8,Prefetch>
real memory = 939196416 (895 MB)
avail memory = 888938496 (847 MB)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A_M_I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of fec80000, fecc0000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xdf6ff000-0xdf6fffff irq 21 at device 2.0 on pci0
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdf6fec00-0xdf6fecff irq 22 at device 2.1 on pci0
usb1: EHCI version 1.0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network> at device 8.0 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xdf7fec00-0xdf7fec7f irq 17 at device 10.0 on pci1
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:76:14:41:64
pci0: <multimedia> at device 5.0 (no driver attached)
atapci0: <nVidia nForce MCP61 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <bridge> at device 7.0 (no driver attached)
atapci1: <nVidia nForce MCP61 SATA300 controller> port 0xc400-0xc407,0xc080-0xc083,0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb88f mem 0xdf6fc000-0xdf6fcfff irq 21 at device 8.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce MCP61 SATA300 controller> port 0xb800-0xb807,0xb480-0xb483,0xb400-0xb407,0xb080-0xb083,0xb000-0xb00f mem 0xdf6f7000-0xdf6f7fff irq 22 at device 8.1 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci5: <ACPI PCI bus> on pcib4
pci0: <display, VGA> at device 13.0 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <Generic IRDA-compatible device> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0
sio0: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio1: configured irq 4 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio1: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcf000-0xcf7ff on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
Timecounter "TSC" frequency 2009148960 Hz quality 800
Timecounters tick every 1.000 msec
usb0: 12Mbps Full Speed USB v1.0
md0: Preloaded image </mfsroot> 20025344 bytes at 0xc09f4ce4
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 9 ports with 9 removable, self powered
usb1: 480Mbps High Speed USB v2.0
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 9 ports with 9 removable, self powered
ad10: 76319MB <MAXTOR STM380215AS 4.AAB> at ata5-master SATA150
Trying to mount root from ufs:/dev/md0
Zapata Telephony Interface Registered on major 196
Echo Canceller: OSLEC
i4bctl: ISDN system control port attached
i4b: ISDN call control device attached
capi: CAPI call control device attached, v2.11
i4btel: 8 ISDN telephony interface device(s) attached
i4bipr: 8 IP over raw HDLC ISDN device(s) attached
i4brbch: 8 raw B channel access device(s) attached
i4btrc: 64 ISDN trace device(s) attached
ztdummy: loaded

hello:
are you sure the askozia can support D110P? it uses isdn4bsd. you have to make sure that isdn4bsd can support D110P. as i know, there is no second way to check your hardware, only from GUI.
regards!
James.zhu