D130 Not being detected by Dahdi

hi,

pls use the following links dahdi driver to try, everything will be ok.
http://downloads.openvox.cn/pub/drivers/dahdi-linux-complete/releases/1.3.5/openvox_dahdi-linux-complete-2.6.2+2.6.2.tar.gz

Hi Chunlei
Have followed all the steps
..downloading openvox_dahdi-linux-complete-2.6.2*
..done all the make etc
cd /usr/src/dahdi-linux-complete-2.6*
make && make install && make config
dahdi_genconf modules
cd /usr/src/libpri*
make && make install
cd /usr/src/asterisk-11.4.0
./configure --libdir=/usr/lib64 && make menuselect && make && make install
make samples ; make config
modprobe dahdi
modprobe opvxd115
vim /etc/dahdi/system.conf
...change us to au
dahdi_cfg –vvvvvv
dahdi_cfg -v
service dahdi start
service asterisk start
[align=left][font=Helvetica, Arial, sans-serif]
[/font][/align]

[align=left][font=Helvetica, Arial, sans-serif]...all seems fine. But when I run asterisk -rvv ... dahdi show channels ... it shows only 1 pseudo channel [/font][/align]
[align=left]Chan Extension Context Language MOH Interpret Blocked State Description [/align][align=left] pseudo default default In Service
[/align]I am at a loss and would appreciate any pointers/help.


Thank you
Lee

i] Last edited by leehchua at 2013-7-16 22:25 [/i

hi,

pls add the following line at the end of /etc/asterisk/chan_dahdi.conf,then restart asterisk to try
#include dahdi-channels.conf

Hi Thank you... really great support from this forum. We have managed to compile and install dahdi, asterisk from the help we have received here. We are getting there. The current state is that all seems to work well with our E1 service. We can make calls out. GREAT! We just cannot receive calls. Checking with our E1 service provider they can see that the call coming in to us has been delivered to the E1 service but we are not accepting it. It looks like it is a configuration problem to enable us to receive calls on our E1 service. Again...any quick pointers on how to fix this would be very much appreciated. Cheers

hi,

the following shows is the "dahdi-channels.conf" config,the default context for incoming call is from-pstn,pls check your dialplan and confirm it
; Span 1: D115/D130/0/1 "D115/D130 (E1|T1) Card 0 Span 1" (MASTER)
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = pri_cpe
channel => 1-15,17-31
context = default
group = 63

if still have problem, send the teamviewer information to me, i help you to check it remotely

Hi,
Thank you very much. We have it resolved. It's all to do with the conf files. Thank you for your assistance. Much appreciated.

Lee