keywords: ip pbx voip gateway gsm gateway

× Questions about VS-GW2120/GW1600/GW1202 and WGW1002G GSM Series VoIP Gateway

Asterisk config - failover to another trunk if all GSM lines busy

8 years 4 weeks ago #9191 by rick.zhu
Hi,

Sorry to make trouble to you.

Please contact me directly,so that i can check your issues remotly.

My contact info be shown as below:
Skype: rick.zhu3
Gtalk: This email address is being protected from spambots. You need JavaScript enabled to view it.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Best Regards.
8 years 3 weeks ago #9198 by rick.zhu
Hi,

Now the gateway can support your needs.

I give you a sample manual,you can refer it and configure it.

Please download it from attachment.

If you have any issues please contact me,My contact info be shown as up.

Best Regards.
8 years 3 weeks ago #9199 by rick.zhu
This is attachment.
Attachments:
8 years 3 weeks ago #9201 by aleyer
Yes, I am aware that this feature is present in the gateway itself. But if I use it, the PBX billing system won't be able to distinguish whether the calls were made through GSM or SIP, that's why I need to configure that in the Asterisk system that connects to the GMS gateway as a SIP peer, so that it could make a proper record to the billing data. So, the question is: does the gateway provide the necessary information (and what kind of information) to the Asterisk on the PBX, that connects to the gateway as a SIP client?
8 years 3 weeks ago #9207 by rick.zhu
Hi alayer,

Please contact me directly,so that i can know more details about your question.

My contact info be shown as up.

Best Regards.
7 years 9 months ago #9409 by aleyer
Finally, I managed to configure it.
But one question remains. If I save SIP Endpoint settings, a line "insecure=invite,port' appears in the corresponding section of sip_endpoints.conf. But I don't need it. Can you tell me how to turn it off?

i] Last edited by aleyer at 2014-2-11 17:10 [/i
Time to create page: 0.038 seconds
Powered by Kunena Forum