keywords: ip pbx voip gateway gsm gateway

× Questions about VS-GW2120/GW1600/GW1202 and WGW1002G GSM Series VoIP Gateway

Asterisk config - failover to another trunk if all GSM lines busy

7 years 9 months ago #9409 by aleyer
Finally, I managed to configure it.
But one question remains. If I save SIP Endpoint settings, a line "insecure=invite,port' appears in the corresponding section of sip_endpoints.conf. But I don't need it. Can you tell me how to turn it off?

i] Last edited by aleyer at 2014-2-11 17:10 [/i
7 years 9 months ago #9411 by rick.zhu
Hi,Sorry to reply you delay.

We have considered this issues already.Later we will increase this option in the gateway and so that the customs use it more easy and humanization.
I will let you know once we increase it.

If you have other issues you can contact me directly.My contact info be shown as below:

email:[email protected]
Skype: rick.zhu3
Gtalk: This email address is being protected from spambots. You need JavaScript enabled to view it.

Best Regards.
7 years 8 months ago #9457 by cesargdmi
How I've fixed? :o

in my case, when all Openvox has filled canals, the event returns a "busy here" and my asterisk receives and does not pass to the next trunk:Q[align=center], no way to change this event "busy here" for "TEMPORARILY unaviable "or" unaviable service "to pass my trunk failover in my asterisk server?[/align]

7 years 8 months ago #9458 by rick.zhu

This is Rick,sorry to make trouble with you!

According to your descriptions,if you want the gateway return "TEMPORARILY unaviable "or" unaviable service "to your server when all channels be used
Maybe we need to change the program code for you.I will discuss it with our R&D,and then give you a answer.

If you have other issues,you can contact me directly.My contact info be shown as below:

Email:[email protected]
Skype: rick.zhu3

Best Regards.
7 years 8 months ago #9459 by rick.zhu

This is Rick,Now i have a way can solve your issues!Please try to do it refer to belows:
Step 1: Please login your gateway via ssh.
How to enable the ssh login: SYSTEM-->Login Settings

Step 2: Please change a dialplan,follows:
[email protected]:/# cd /etc/asterisk/
[email protected]:/etc/asterisk# vi extensions_routing.conf

Please change the line 143 to follows:
exten => s,1,Hangup()

change it to
exten => s,1,Hangup(42)

and then save it and quit.

Step 3:reload the dialplan.
[email protected]:/etc/asterisk# asterisk -r
Cannot read termcap database;
using dumb terminal settings.
Verbosity is at least 10
Openvox-Wireless-Gateway*CLI> dialplan reload

Notice: As a temporary measures,please don't change the dialplan via WEB.Because it will cover the dialpaln you changed.We will add it later for the custom.

If you have other issues please let me know.I will do it for you remotely.My contact info be shown as up.

Best Regards.
7 years 8 months ago #9463 by cesargdmi
Hello dear and respected moderator :)

are you sure it is on the line 143?

will not, perhaps, in the context [NoCDR]?

in my case it was on the line 198, I have adjusted my dialplan, I will test and informs them.

Best Regards
Time to create page: 0.035 seconds
Powered by Kunena Forum