keywords: ip pbx voip gateway gsm gateway

× Questions about VS-GW2120/GW1600/GW1202 and WGW1002G GSM Series VoIP Gateway

SMS status

7 years 2 months ago #9914 by Michael.zou
Hi.
you can see the picture below, is it your means?

Attachment 11111.png not found



Attachment 2222.png not found


Regards!
Michael
OpenVox Support Team
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Skype: along.zou
Tel: +86-755-66630978 ext.657
Quick Support:
wiki.openvox.cn/index.php/OpenVox_Quick_Support
Support Forum:
www.openvox.cn/forum/index.html
Attachments:
7 years 2 months ago #9916 by Eppi
is it possible to get this information through "sms to http" api?

best regards
paul
7 years 2 months ago #9917 by lindali
Hello,

This is Linda.For more details, please add my skype to your contact list. or you can contact me via skype.

Best regards
7 years 2 months ago #9918 by Denins.Den
Hi Eppi,
If you want to sms sending report for http api, just enable the option like below:

Attachment 20140901212444.jpg not found



and you said you want to get info throuth "sms to http", can you explain this function?
Thanks
Attachments:
7 years 5 days ago - 7 years 5 days ago #10051 by soloma
Hi, Den!
Enabling option "Report JSON" only allow to accept report of sending message status, it is not requested reciept. In WEB GUI it is only available in SMS Outbox.
For remote access to status reports of sent SMS I have to parse AT logs or SMS Outbox log and then send this information to remote system. In another way I use scp and repeatedly copy outbox file to remote system.This messages is not acceptable in AMI or another usable interface. All of this solution are not good and may cause loss of information.
This sample from CLI log shows that report is accepted and fully decoded by gsm module of asterisk.
1:<<< 0 0031000C81XXXXXXXXXXXXXXX0000FF0EF3B0993C279B41B2194D36A301 -- +CSQN: 23, 0 , 12
 		1:<<< 0 0031000C81XXXXXXXXXXXXXXX0000FF0EF3B0993C279B41B2194D36A301 -- +CDS: 25 , 8
 		1:<<< 1 0031000C81XXXXXXXXXXXXXXX0000FF0EF3B0993C279B41B2194D36A301 -- 0791836027201111060D0C81XXXXXXXXXXXXXXX411132003301804111320053338000 , 66
 SMS Report PDU = 0791836027201111060D0C81XXXXXXXXXXXXXXX411132003301804111320053338000
 Status = 0
 SMSC Length = 7
 SMSC Type-of-address = 0x91
 SMSC Number = +380672021111
 PDU Type = 0x6
 PDU MR = 0xd
 Sender number length = 12
 Sender Type-of-address = 0x81
 Sender Number = XXXXXXXXXXXXXXX
 TP Service Center Time Stamp = 14112300331008
 TP Discharge Time = 14112300353308
You have the very nice "SMS to HTTP" API that can be used to send status report. It can be implemented with new API "Report to HTTP" or adding some new keys at existing one.
Fields required to resolove original SMS:
Span
Status = 0
PDU MR = 0xd
Sender Number = XXXXXXXXXXXXXXX
TP Service Center Time Stamp = 14112300331008
TP Discharge Time = 14112300353308
7 years 5 days ago #10052 by lindali
Hi,
This is Linda from openvox. If you have probems, please contact me via skype. The sms receipt is enabled by default.

email: This email address is being protected from spambots. You need JavaScript enabled to view it.
skype: linda.li258
Time to create page: 0.034 seconds
Powered by Kunena Forum