keywords: ip pbx voip gateway gsm gateway

× Questions about VS-GW2120/GW1600/GW1202 and WGW1002G GSM Series VoIP Gateway

Unable to get 1 module, out of 5 working.

7 years 2 months ago - 7 years 2 months ago #9922 by Bonz099
For some reason, We are unable to get one module to start correctly. Here is a paste of the board log.

[2014/09/03 00:16:56] Power on
[2014/09/03 00:20:02] Restart asterisk (gsm 1 block).
[2014/09/03 00:23:24] Restart asterisk (gsm 1 block).
[2014/09/03 00:26:46] Restart asterisk (gsm 1 block).
[2014/09/03 00:30:07] Restart asterisk (gsm 1 block).
[2014/09/03 00:33:29] Restart asterisk (gsm 1 block).
[2014/09/03 00:36:52] Restart asterisk (gsm 1 block).


It just keeps going on. It doesn't appear to be configured correctly, as it doesn't even flash the lights the same way the other modules do during start-up. Please advise, as a reset on the board has not helped at all. We are running 2.0.8 Thank you.

Model is VS-GW1600-20G
7 years 2 months ago #9923 by lindali
Hello,

For more details, please contact me via skype or email. And please prepare remote ssh for checking. My contact info is shown as below.

skype: linda.li258
email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Best regards
7 years 1 month ago #10000 by supernovatelecom
Set the CODEC as 1-g729 2-ulaw 3-alaw .. that will work.
Time to create page: 0.031 seconds
Powered by Kunena Forum