×
Notice
The forum is in read only mode.
Forum
VoIP Gateways Support
GSM Gateway
I Have problem whith GW1200 4g
×
Questions about VS-GW2120/GW1600/GW1202 and WGW1002G GSM Series VoIP Gateway
I Have problem whith GW1200 4g
Less
More
Posts: 4
Thank you received: 0
9 years 5 months ago - 9 years 5 months ago #10029
by codi92
I update system from browser then reboot.
After reboot GW just stay and blinking led d4 on board then d3 and d14 in same time
Last Edit: 9 years 5 months ago by
codi92 .
Less
More
Posts: 77
Karma: 5
Thank you received: 7
9 years 5 months ago #10030
by Michael.zou
Hi.
What do you mean d4, d3 and d14? Can you start the GW's system? How about the power led and system led in your GW when you start the GW?
Less
More
Posts: 4
Thank you received: 0
9 years 5 months ago - 9 years 5 months ago #10031
by codi92
Sys led is off
Led diodes on board D4 D3 and D14
is blink interval 1 sec
D4 then 0.5s simultan D17 and D14
Last Edit: 9 years 5 months ago by
codi92 .
Less
More
Posts: 77
Karma: 5
Thank you received: 7
9 years 5 months ago #10032
by Michael.zou
Hi.
Does your GW have 20 ports?
Does D4 mean gsm-1.4, D3 mean gsm-1.3?
If you can not start system of GW, please click hardware reset button of every board, stay about 8 seconds.
Less
More
Posts: 4
Thank you received: 0
9 years 5 months ago #10033
by codi92
I have done this, it even doesn't reboot.
Less
More
Posts: 77
Karma: 5
Thank you received: 7
9 years 5 months ago #10035
by Michael.zou
Hi, please add me to your skype contact list, I will help you to figure it out.
My skype is along.zou, named Michael.
Forum
VoIP Gateways Support
GSM Gateway
I Have problem whith GW1200 4g
Time to create page: 0.041 seconds