- Posts: 5
- Thank you received: 0
×
Questions about VS-GW2120/GW1600/GW1202 and WGW1002G GSM Series VoIP Gateway
WGW1002G as sip-client setup help nedded
9 years 4 months ago #10090
by lexalex
I made a SIP-connection as described in manual (using settings from provider (from asterisk.tgz)):
SIP Endpoints -> "Add New SIP Endpoint":Then: "Save" and "Apply"
I see "SIP Status"= "Request Sent" in SYSTEM->Status->SIP_Information for "Endpoint Name"= (testname)
But I can make/accept calls with X-Lite softphone using the same settings!!
I gotin ADVANCED -> "Asterisk File Editor" -> sip_general.conf
but there should be(in [general] section of sip.conf) according to exaple configiration
So,
Should I correct "register=>" option manually?
SIP Endpoints -> "Add New SIP Endpoint":
Name: testname
User Name: (mynum)
Password: (mypass)
Registration:This gateway registers with the endpoint
Hostname or IP Address: multifon.ru
Transport: TCP
NAT Traversal: Yes
Advanced:Registration Options
Authentication User: (mynum)
Register Extension: (mynum)
From User: (mynum)
From Domain: multifon.ru
Remote Secret: (mypass)
Port: 5060
Qualify: Yes
Qualify Frequency: 60
Outbound Proxy: sbc.megafon.ru
Call Settings
DTMF Settings
DTMF Mode: InbandI see "SIP Status"= "Request Sent" in SYSTEM->Status->SIP_Information for "Endpoint Name"= (testname)
But I can make/accept calls with X-Lite softphone using the same settings!!
I got
register=>(mynum):(mypass):(mynum)@multifon.ru:5060/(mynum)but there should be
register=>(mynum)@multifon.ru:(mypass):(mynum)@sbc.megafon.ru:5060/(mynum)So,
Should I correct "register=>" option manually?
- Michael.zou
-
- Offline
- Moderator
-
Less
More
- Posts: 77
- Karma: 5
- Thank you received: 7
9 years 4 months ago #10091
by Michael.zou
Regards!
Michael
OpenVox Support Team
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Skype: along.zou
Tel: +86-755-66630978 ext.657
Quick Support:
wiki.openvox.cn/index.php/OpenVox_Quick_Support
Support Forum:
www.openvox.cn/forum/index.html
Hi.
you do not need to modify the configuration files, just modify in web GUI, and does it always show "request sent" of the sip status?
you do not need to modify the configuration files, just modify in web GUI, and does it always show "request sent" of the sip status?
Regards!
Michael
OpenVox Support Team
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Skype: along.zou
Tel: +86-755-66630978 ext.657
Quick Support:
wiki.openvox.cn/index.php/OpenVox_Quick_Support
Support Forum:
www.openvox.cn/forum/index.html
- Michael.zou
-
- Offline
- Moderator
-
Less
More
- Posts: 77
- Karma: 5
- Thank you received: 7
9 years 4 months ago #10093
by Michael.zou
Regards!
Michael
OpenVox Support Team
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Skype: along.zou
Tel: +86-755-66630978 ext.657
Quick Support:
wiki.openvox.cn/index.php/OpenVox_Quick_Support
Support Forum:
www.openvox.cn/forum/index.html
Hi.
Can you let me check remotely? And it is too late now, can I contact you tomorrow?
Please add me to your skype contact list, my skype is along.zou, named Michael.
Can you let me check remotely? And it is too late now, can I contact you tomorrow?
Please add me to your skype contact list, my skype is along.zou, named Michael.
Regards!
Michael
OpenVox Support Team
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Skype: along.zou
Tel: +86-755-66630978 ext.657
Quick Support:
wiki.openvox.cn/index.php/OpenVox_Quick_Support
Support Forum:
www.openvox.cn/forum/index.html
Time to create page: 0.040 seconds