keywords: ip pbx voip gateway gsm gateway

× Questions about VS-GW2120/GW1600/GW1202 and WGW1002G GSM Series VoIP Gateway

USSD problems with MTK 0828

6 years 11 months ago #10215 by hua
Hi,

Sorry to make you trouble, It need to update the GSM modules' firmware. Please add my skype upper.hua .

Best regard
upper
6 years 11 months ago #10221 by jorgepy
Hi upper, i already added you to skype. My skype user is jorge.py

Our time zones are very different, so if we could communicate by email would be very good.

I hope to communicate with you shortly, i need to solve this.

Regards
6 years 10 months ago #10244 by lindali
Hi Jorge,

Please try this command: asterisk -rx "gsm send ussd 1 2 30"
If you still have problem, you can add my skype. I'll help you.

best regards,

skype: linda.li258
email: This email address is being protected from spambots. You need JavaScript enabled to view it.
6 years 10 months ago #10245 by lindali
Hi Jorge,

Please try this command: asterisk -rx "gsm send ussd 1 2 30"
If you still have problem, you can add my skype. I'll help you.

best regards,

skype: linda.li258
email: This email address is being protected from spambots. You need JavaScript enabled to view it.
6 years 10 months ago #10246 by jorgepy
Hi Linda

The problem persist in the same way.

Even adding 30 to the end of the command. the second command is always fails and does not allow me to continue.
6 years 10 months ago #10262 by chusov
Have the same problem on VS-GGU-E2M0400.
There is a solution?
Time to create page: 0.035 seconds
Powered by Kunena Forum