keywords: ip pbx voip gateway gsm gateway



The forum is in read only mode.
× Questions about VS-GW2120/GW1600/GW1202 and WGW1002G GSM Series VoIP Gateway

SMS to HTTP service problem

4 years 2 months ago #13939 by Baranov
Hello i have VS-GWM400 gsm gateway running latest 2.5.2 firmware but SMS to HTTP doesn't work. If i access my http service directly from browser then it works perfectly but if i send SMS to gateway noting happens. I can confirm that "SMS receive" is enabled i see my messages in inbox but they don't trigger HTTP service.
My URL string looks like that (with sample data): 19:04:00&status=ok
If i copy and paste it in browser everything works but OpenVox doesn't.

This is URL string based on internal IP, i also have my service accessible from internet but i also doesn't work with OpenVox.
4 years 2 months ago #13954 by Echo
Hi, sir

if you want to copy and paste it in browser to send SMS, you need to enable the Http to SMS and copy the URL to browser.

and if you want to use SMS to Http, you can refer to the screenshots and the demo of attachments.
4 years 2 months ago #13956 by Baranov
As i mentioned in the name of the topic, i want to receive SMS messages using HTTP service I've made. I've seen the manuals you posted. As i said before when SMS gate gets my message and i can see it inbox nothing happens i don't get incoming HTTP request from the gate on my service.
4 years 2 months ago #13958 by Echo
Hi, sir

have you modified your parameter as you see in the screenshots of attachments?
and you mean you want receive SMS ,so you dont need to copy the URL in SMS to http to browser.
and if your parameters are correct, you will receive it.
Time to create page: 0.040 seconds
Powered by Kunena Forum