Openvox GW1600 V2 + VS-GWM400W

Hi

Tell me who knows GW1600 V2 + VS-GWM400W are compatible?

Hello

Yes.But you should also note this , You need to configure GWM400W board from its own IP address . GWM400W and GW1200 V2 Control board have seperate system .

main board GW1600 V2 - 2.1.28 (Software Version) modules VS-GWM400 - 2.5.8 (Software Version)

modules are available at addresses http://192.168.99.1, http://192.168.99.2
what and how to configure on each board? (VS-GWM400)
system -> cluster
Master? Slave? Stand-alone?
what IP addresses?

Do you have instructions?

Hello

They can use at one box with their own IP address , You can not manger them with one IP address because of they are different hardware and system software .

Did I understand correctly?
If using VS-GWM420 Control Board (GW1600V2) and VS-GWM400 and VS-GWM420 modules
I will get 2 different (unlinked) systems.
1 - VS-GWM420 + all VS-GWM420 modules by IP VS-GWM420
2 - all VS-GWM400 modules by Master IP cluster

I can't see (use) VS-GWM400 modules at the IP address VS-GWM420?

I ask for an answer to the above question.
In a presentation at OpenVox VoxStack Series V2 www.avanzada7.com/download/2592_FT%20VS-...INGLES%20OPENVOX.pdf
page 2 VS-GWM Series Wireless Gateway Module comparison says:
These two series module can be mixed and used.

Hello

You are correct.
Mix and use not mean manger them with one IP address .