keywords: ip pbx voip gateway gsm gateway

× Questions about G400/G410 Cards.

hard machine hang with G400P

10 years 6 months ago #8338 by krzysioD
sorry, i have only screen shot from ilo but:
machine runs no problem without G400P
after some time - if calls and /or sms go through G400P - the machine hangs in kernel mode in gsm710_extract_frames (in opvxg4xx)

it's a 64 bit machine with old PCI G400P card.
any hints?

i] Last edited by krzysioD at 2012-9-25 21:33 [/i
10 years 6 months ago #8342 by Joe.Yung
Could you please tell us what exact model of G400P? And what version of chan_extra do you use now? Also, including kernel version.etc
Actually, chan_extra-2.0.5 has supported 64-bit machine.

Perhaps we can have a live chat with MSN(This email address is being protected from spambots. You need JavaScript enabled to view it.) or give remote access message to me(send it to my email address below) and let me have further look then.

10 years 6 months ago #8348 by krzysioD
Linux zimbra 2.6.32-5-amd64 #1 SMP Mon Jan 16 16:22:28 UTC 2012 x86_64 GNU/Linux
[ 7113.548887] Found an OpenVox G400P: Version 1.0

06:01.0 Unassigned class [ff00]: Device 1b74:0100 (rev 01)
Subsystem: Device 1b74:0104
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 74
Region 0: Memory at fdff0000 (32-bit, non-prefetchable) [size=64K]
Kernel driver in use: opvxg4xx

DAHDI Tools Version - 2.5.0
10 years 6 months ago #8350 by Joe.Yung
On the basis of your last messages, driver opvxg4xx has been compiled and loaded. But the screenshot seems to be wrong of the kernel/operation system, but it's not enough to trace more. So could you provide remote access connection to us?

Time to create page: 0.030 seconds
Powered by Kunena Forum