keywords: ip pbx voip gateway gsm gateway

× Questions about how to buy OpenVox product and other business infomation.

which product should choice?

14 years 1 month ago #565 by miaolin
could you descript your requirement more clearly? such as how many extensions you want, what kind of pstn line you are using etc.
14 years 1 month ago #569 by sss
We're using hunting line with 4 pstn line into office pansonic hunting pbx + 10 handset extension, as below description, all incoming phone line will join into "elasix" with "IVR" & to enable voice message box, we want to keep existing extension to hunting pbx & all others new extension will create at IPPBX system but both can communicate together & dial out too.

Our idea is all incoming pstn line -> ippbx -> ivr ->ippbx extension (e.g. ext. 110 - 130) or -> hunting pbx -> extension (e.g. 100 - 109). ->all can dial out & dial intercom + voice message enable

Is it possible work?
14 years 1 month ago #570 by miaolin
You can use a 4*FXO+4*FXS card to make your system.

The 4*FXO are used to connect PSTN, and the 4*FXS are used to connect your panasonic.

We have several model that suit your requirement:

A1200P0404, A800P44, or 1*A400P40+1*A400P04.

Both can make 4*FXS+4*FXO system.
14 years 1 month ago #576 by sss
Thanks, is it needed to add RJ11 splitter for handset or panasonic pbx collection?

By the way, if we change phone line incoming by DDI method, what's model we should pick? And what's hardware requirement for "Elastix" is needed? And also, would it available combine with hunting line + DDI line into a system? If so, what's model will need?
14 years 1 month ago #577 by miaolin
Are you still keep using traditional PSTN line, just add DDI function on to it? If yes, any A series cards can fit your usage.

For the splitters, it depends on model, each A1200P need 1 pcs sp140, each A800p need 1pcs sp141.
14 years 1 month ago #582 by sss
As the phone line plan will renew, our supplier said they've DDI service available which is used T1 line(is it correct?). Then we can have lot of virtural number to instead of extension number for call in. If so, which config will more suitable? (will keep the analog panasonic pbx as previous diagram setting)
Time to create page: 0.035 seconds
Powered by Kunena Forum