keywords: ip pbx voip gateway gsm gateway

× Questions about how to buy OpenVox product and other business infomation.

A400P dialing very slowly

12 years 8 months ago #4181 by Joe.Yung
Hello Patrick,
You mentioned that the asterisk version is 1.4, but could you tell me the exact version of it? And what are your configuration file zapata.conf. extensions.conf .Actually, there are some people already experienced the delay issue in trixbox . I don't think this to do with the hardware.If you don't have other particular features to test I suggest you try this combination of software(zaptel-1.4.11 and aterisk-1.4.20) instead of the version you owned now. There is solution about solving the delay in trixbox, but I am not sure it whether matched your case. https://www.trixbox.org/forums/trixbox-forums/help/suddenly-everything-slow. Any question, please post here!


Best Regards!
Joe.Yung

12 years 8 months ago #4183 by ultimeon
Hello Joe,

The asterisk version is Asterisk 1.4.21.2
and zaptel is 1.4.11 here is the zapata.conf
and extensions.conf

exten => _00X.,1,Dial(Zap/g0/${EXTEN},,rf)

Very simple.

[trunkgroups]

[channels]
context=from-pstn
signalling=fxs_ks
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1



immediate=no

signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 1
context=default

signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 2
context=default

signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 3
context=default

signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 4
context=default

If you have any hint to solve the problem you would save me :)
12 years 8 months ago #4185 by james.zhu
hello:
please open the debug mode in asterisk with the datetime format, you will see which process take 10 Sec. please give IRQ information as well.
regards!
James.zhu

12 years 8 months ago #4186 by Joe.Yung
Hello Patrick,
It seems normal from your configuration file. Please try the way as James.Zhu mentioned above, and give the info by running command zttest. If it still could not solve, please send your SSH to This email address is being protected from spambots. You need JavaScript enabled to view it.. Good Luck!


Best Regards!
Joe.Yung

12 years 8 months ago #4190 by ultimeon
Hello,

Let's remove the default version from apt and and install version 1.4.20 of Asterisk and zaptel 1.4.11 from sources.
as recommanded
I will activite debug mode and tell you if we have something new !
Thanks for you help!

Regards,

Patrick
12 years 8 months ago #4191 by ultimeon
Hello,

zttest seems good we have more than 99.99 avg
Results after 345 passes ---
Best: 99.998 -- Worst: 99.990 -- Average: 99.996479, Difference: 99.996479

The 1.4.20 asterisk portability doesn't change anything and
even with debug mode activate ( verbosity 100 and debug 100) nothing happen when the zap dialout
we just have these damned 10 sec blank moment ...this is crazy.
We are going to change the server and if we still have the problem
We will send ssh and root access to the serveur maybe Joe will be able to help.

:(

Regards,

Patrick
Time to create page: 0.033 seconds
Powered by Kunena Forum