keywords: ip pbx voip gateway gsm gateway

Problems with calls through FXO trunk

6 years 4 months ago #10633 by Dario.hu
set the parameter busydetect=yes, busycount=6 at file /etc/asterisk/chan_dahdi.conf. if problem still ,add my skype: dario.hu2
6 years 4 months ago #10634 by juan.ing
Hi,

Thanks for your response. It is working fine now.
Now, I am having problems with incomming calls. I have configured an incomming rule. From trunk openvox to an internal SIP extension. The calls are not redirected to the sip phone. Any ideas?

Thanks
6 years 4 months ago #10635 by hua
6 years 4 months ago - 6 years 4 months ago #10636 by juan.ing
Hua,

Yes, I followed that quickstart guide and just changed Destination to User extension 6005 instead of 6088, the default FXS ext.
This is working fine when I configure incoming calling rule from an Openvox GSM gateway trunk to the same internal sip extension (6005).

I get this error in asterisk messages log file when the call is entering:
chan_dadhi.c: DTMFCID timed out waiting for ring. Exinting simple switch

Any idea?

Thanks,
Br,
Juan

hua wrote: Hi,

Please check this link www.openvox.cn/pub/manuals/Release/Engli...Quickstart_Guide.pdf

6 years 3 months ago #10642 by juan.ing
Hi Hua,

Any idea about this error code?

Thanks!!
6 years 3 months ago #10643 by hua
Hello,

I think these is something wrong with your CID detecting, Please change the opermode to your country and add my skype upper.hua .
I will help you to check it .
Time to create page: 0.039 seconds
Powered by Kunena Forum