keywords: ip pbx voip gateway gsm gateway

× Questions about IX100

Corrupted CompactFlash on boot

10 years 9 months ago #7980 by Befo
We are currently developing systems with OpenVox IPC100B motherboards.We use a Linux OS installed on an 8Gb CF.Occasionally the system doesn't start and displays a message that means the CompactFlash is corrupted.A simple reboot fixes the problem.Has anybody ever had this problem?
10 years 9 months ago #7981 by Joe.Yung
Hello,
I think you should check if the Jumper 3 was closed to the right place.

Normally, the first two pins should be closed if you use Compact Flash as Master storage device.

10 years 9 months ago #7983 by Befo
hello,

Thank you for your quick answer.
The jumper 3 (1-2) is closed (the CF is configured as Master).
Attached is a picture of jumper.
10 years 9 months ago #7984 by Joe.Yung
Hello,
If the jumper is correctly closed.
Can you insert another Compact Flash and see if there is a same problem?

10 years 9 months ago #7998 by Befo
We tested a new openvox card with just a CF and an UART connection to log the boot.we have swich on 100 times the ipc100B. In 100 times, 3 times the card doesn't boot. On the UART connection, we have nothing.
Do you have an idea why the card is not boot ?
Time to create page: 0.029 seconds
Powered by Kunena Forum