AnalogGatewayH3-1.1.56-2023-12-15-17-37-47.bin Release date: 15/12/2023 *Add FXO self-switching feature *Add OpenVPN Log size limitation *Add error correction function for static routes *Add ipv6 function *Add pulse dialing function *Add battdebounce parameter. *Add the display of chip model. *Add login timeout setting *Optimized stun function *Optimized ipv6 status display *Optimized mwi message lighting problem *Optimized Cloud Management Connection Tool *Optimized background asterisk display *Optimized forced answer function *Optimized call barring startup exception. *Optimized black and white list function *Optimized of differentiated ringing function *Optimized in-channel partial machines for 60XX *Fixed Analog gateway fxs long time call problem *Fixed Abnormalities of uploading language function items *Fixed the problem that page vulnerability handling and avoiding page related commands affecting the background. *Fixed the problem that the analog gateway FXO inbound call without CID to show unknown by default. *Fixed the problem of abnormal page display caused by batch route binding. *Fixed the problem that different H2 devices have different factory IPs, and the jump display is abnormal. *Fixed the problem that restoring factory settings ip display anomaly *Fixed the problem that open and close echo cancellation, page display anomaly *Removed the restriction of callerid in channel setting page. AnalogGatewayH3-1.1.54-2023-04-12-12-23-58.bin Release date: 12/04/2023 *Fixed the problem that failure of port query and ip modification caused by opening Self-Switch. *Fixed the problem that failure of saving special function keys. *Fixed the problem that web can not be accessed when device runs. *Fixed the problem that enabling self-switching cause port query and modifying ip failure *Fixed the problem that simulation gateway sip account status abnormal *Fixed the problem that sip binding number field disappeared after self-switching is turned on *Fixed the problem that H2 plug-in 1O1S module cannot be recognized *Fixed the problem that web page simulation settings advanced settings under FXO page parameter modification does not take effect *Fixed the problem that IAG800 v2 incoming call not detected incoming display *Fixed the problem that IAG800v2 probability of not detecting incoming calls *Fixed the problem of IAG800v2FXS binding SIP account *Fixed the problem of MAG1000 FXS call-out failure *Fixed the problem that web channel list always stuck in loading state *Fixed the problem that failed to dock to public network server T38 fax *Added usage scenario of multiple FXS gateways self-switching *Optimized the password encryption method, the year, month and day do not match to make up 0 *Optimized page default parameters and the range of values optimization *Optimized cdr log *Optimized product id acquisition *Optimized pat fork reinvite information *Optimized FXS/FXO initialization process *Optimized firewall black and white list exception *Released the limit that dts limit the cpu frequency AnalogGatewayH3-1.1.52-2022-12-28-10-39-27.bin Release date: 28/12/2022 *Fixed the problem that failure of port query and ip modification caused by opening Self-Switch. *Fixed the problem that failure of saving special function keys. *Fixed the problem that web can not be accessed when device runs. AnalogGatewayH3mag-1.1.46-2022-10-13-17-02-13.bin Release date: 13/10/2022 *Added switch for SIP user. *Added to field matching in option request. *Added regular limit in group command. *Added network port settings in cloud management. *Fixed default gateway issue. *Optimized number matching table default values. *Optimized dialing matching and caller list. *Optimized self-switching page. *Changed netowkr port display. *Optimized DHCP option judgment. AnalogGatewayH2-1.1.32.bin Release date: 15/02/2022 *Added switch for SIP user. *Added to field matching in option request. *Added regular limit in group command. *Added network port settings in cloud management. *Fixed firwall issue. *Optimized IP information display. AnalogGatewayH2-1.1.30.bin Release date: 07/09/2021 *Added a priority matching switch for SIP account configuration and a matching sequence option in SIP advanced settings. *Added IP option for restoring factory settings and optimized display content. *Fixed issue that failed to save page. *Fixed the issue caused in online upgrade. *Fixed customized conrfiguration webpage style issue caused by restoring factory. AnalogGatewayH2-1.1.28.bin Release date: 08/07/2021 *Fixed the issue that calls fail when using FXS port custom routing rules . *Fixed the issue of page display. *Fixed the issue of DISA button. *Fixed the issue of SIP account and password. *Added g168echo cancellation option. *Deleted limit of T38 fax and supported O port,S port,SIP. *Added cloud management use frp. *Optimized bcg729 code library. AnalogGatewayH2-1.1.26.bin Release date: 21/04/2021 *Fixed the issue that echo parameters of analog gateway cannot be saved. *Added support of N2NVPN. *Added choices of routing custom rules *Added functions required by customers 1)Uploading of https certificate one the page. 2)Added a remote public key connection device. public keys will not be cleared when iptech device restart device. others' public key will be cleared. 3)SNMP and quering related information functions. AnalogGatewayH2-1.1.18.bin Release date: 15/01/2021 *Modified lighting effects of wiring, unconnected, off-hook, ringing, calling and factory reset. AnalogGatewayH2-1.1.16.bin Release date: 15/12/2020 *Optimized the IP display in SIP information on the home system page when Sip is configured with anonymous + None mode. *Optimized JNT automatically upgraded. When it didn't get Option 66, it will be upgraded via a custom address. *Optimized the problem of high virtual memory usage of ws_api tool. *Optimized the echo cancellation problem. *Fixed the problem that upgrade page can not be used via dhcp after reboot in vlan mode. AnalogGatewayH2-1.1.12.bin Release date: 05/11/2020 *Fixed the issue that unable to access the extenrnal network and the sip registration time is too long *Optimized JNT project anolog gateway *Added that open boot entry by default *Unified IAG8XX V2 gateway WAN/LAN port chassis silk screen display *Modified vendor-class-indentifier parameters *Opened the automatic upgreade feature webpage *Fixed the issue that the coud management status is periodically cleared and the webpage status is displayed incorrectly AnalogGatewayH2-1.0.6.bin Release date: 24/03/2020 *Fixed the issue that the page does not respond after the firmware upgrade *Fixed display irregularity *Fixed an issue where client synchronization failed *Fixed an issue where the system repeated soft restart tests *Fixed Toolkit issues *Fixed issues with VPN Settings *Fixed issue with special function keys *Fixed issue with Time *Fixed hardware peripheral issues *Fixed several issues with Network Settings *Fixed an issue where the ssh background initially displayed Build-in errors *Fixed issue with national FXS call tone *Fixed several issues with FXS settings in the simulation settings *Fixed the issue of system exception after restart *Fixed the issue that the dial tone is delayed after picking up the FXS phone *Fixed system crash after modification of driving parameters *Fixed the problem that there is no dial tone in FXS after manual repair in the case of page error *Modified FXS signaling parameters *Fixed the problem that dahdi could not run after modifying the drive parameters *3 call features are turned on by default in the factory configuration *Fixed the problem that the call failed due to the establishment of a sip backup address *Fixed the problem that the DTMF sound can be heard after the phone answers *Fixed the problem that the sip account fails after selecting the TCP transmission method *Fixed the issue that MWI function is invalid *Fixed an issue where the device cannot be assigned an IP address by slot number when restoring the factory configuration *Fixed an issue where recording stopped failing *Fixed the issue that log auto-clearing fails *Fixed issues related to codec *Optimized sip extension configuration *Fixed the issue that the system cannot dial each other after running for a period of time *Fixed the issue of obvious snowflake sound when three-way call was made after FXS selected alaw *Fixed an error that the port information was configured *Fixed logic issue on Config Label page *Fixed an error when Tools clicked online upgrade *Fixed display of routing information names *Added sip ring group feature *Fixed TLS related issues *Fixed system crash issue caused by flash read and write errors *Fixed the problem that the Sip-Trunk to FXS port cannot communicate in both directions when flexible routing is started *Fixed directmedia parameter modification of SIP advanced settings not taking effect *Fixed several issues with ASTERISK API function verification in ADVANCED *Fixed an issue where modifying the FXS offhook-antishake parameter caused the dial tone to go off-hook *Fixed the issue of page jam when viewing the log module *Fixed the inconsistency between the refresh of logs and the comparison of server log reports *Fixed the problem of constant hanging caused by reverse polarity signal response switch configuration *Fixed the issue that after flexible routing is turned off, you can also dial the extension bound to FXS *Fixed the Failover fxo function of FXS port disconnection *Fixed configuration file upload failure *Fixed the problem that the configuration file failed to save after the file was uploaded successfully *Fixed the problem that there is no sound from one phone of the three-party call in UC system *Fixed an issue where turning on the auto-clear function and then clicking the clear function *Fixed the problem that the login name and password of the web page can be viewed in the background *Summary of web interface related optimizations and translations *Fixed parenthesis issue when uploading configuration file names *Fixed small window display error in channel configuration *Fixed the issue of eth1 network port selection when burning MAC address *Fixed an issue where the network has a static IP and the device will send a DHCP request when restarting *Fixed the problem of restoring factory settings and not automatically jumping according to the factory IP of the slot *Fixed the problem that the ssh service cannot be accessed after the device restarts *Fixed the issue of high stability call failure rate *Fixed issue with physical reset button *Fixed an issue where the page cache issue caused the restore to fail after the version upgrade *Fixed an issue where FXO checked CID containing both number and name information *Fixed an issue where called number matching would fail in routing rules from sip to FXO group *Optimized vpn *Fixed SIP Advanced Adding Hang CodeFixed the bug that firmware upgrade, page does not respond Notice: 1) Factory settings need to be restored after the upgrade; 2) After replacing modules of different types (FXO -> FXS or FXS -> FXO), it is recommended that the system be restored and restarted AnalogGatewayH2-0.0.3.bin Release date: 17/12/2019 *Fixed the bug that firmware upgrade, page does not respond *Fixed the bug that the web interface display irregular *Fixed the bug that fails to sync system time *Optimized the run indicator light *Fixed the bug that the initial information in ssh background shows wrong *Fixed the bug for National FXS Call Tone Issue *Fixed several issues with FXS *Fixed the bug that the dial tone is delayed when FXS phone picks up *Fixed the bug that system crashes after modification of drive parameters *Fixed the bug that there is no dial tone in FXS *Optimized FXS Signaling Parameter *Fixed the bug that after modifying the driving parameters, dahdi cannot start-up normally *Optimized the initial call parameters *Fixed the bug that sip secondary address causing call failure *Fixed the bug that after answering the phone, DTMF can be heard *Fixed the bug that sip account invalid when selects TCP transmission mode *Fixed the bug that MWI function is invalid *Fixed the bug that cannot assign IP by slot number after the device is restored to the factory configuration *Fixed the bug that recording stops failed *Fixed the bug that the log auto-clear failure *Fixed some codec related issues *Optimized the sip extension configuration *Fixed the bug that extensions cannot dial each other after the system has run for a period of time *Fixed the bug that FXS selects alaw mode, there are obvious snowflakes when talking to three parties *Fixed the bug that the port information prompt error *Fixed the bug on Config Label page *Fixed the bug that prompt error when Online Upgrade *Fixed the bug for Routing Information Name Display *Add sip ring group function *Fixed the TLS related issues *Fixed the bug that unable to talk in both directions between Sip-Trunk and FXS port when flexible routing enables *Fixed the bug that the modification of directmedia parameter in SIP advanced settings does not take effect *Fixed the several problems with ASTERISK API function verification *Fixed the bug that modifying FXS offhook-antishake parameter results in off-hook dial tone *Fixed the bug that the page is stuck when viewing the log module *Fixed the bug that the log refresh response is abnormal *Fixed the bug that H2 gateway cannot hang up because of [Reverse Polarity Signal Answer Switch] *Fixed the bug that turning off flexible routing option invalid *Fixed the bug with FXS port failover to FXO *Fixed the bug that configuration file upload failed *Fixed the bug that failed to save file uploaded *Fixed the bug that manual clear is invalid after auto clear function is enabled. *Optimized web interface AnalogGatewayH2-0.0.2.bin Release date: 13/11/2019 *Fixed several issues in NETWORK-Network Settings *Fixed H2 hardware peripheral device issues *Fixed H2 special function key issue *Fixed several issues in NETWORK-VPN Settings *Fixed several issues in NETWORK--Toolkit *Optimized Echo cancellation problem *Optimized dahdi-h3wctdm driver parameter adaptation *Optimized Network security configuration *Passed FXS call feature function test *Verified FXO irregular CID detection Notice: ??? 1) Factory settings need to be restored after the upgrade; ??? 2) After replacing modules of different types (FXO -> FXS or FXS -> FXO), it is recommended that the system be restored and restarted