AnalogGatewayUCP-1.2.8.bin
Release date: 24/12/2021
	*Added priority matching parameter in SIP account page.
	*Updated openvpn to 2.5.0 and added manual configuration feature in webpage.
	*Added secondary dialing feature.
	*Optimized firewall .

AnalogGatewayUCP-1.2.2.bin
Release date: 10/11/2020
	*Supported that customizing the company and its log related information.
	*Optimized that reserved IP closed does not take effect and device still can be accessed.
        *Fixed the problem of SWG2008 module indicator .

AnalogGatewayUCP-1.1.8.bin
Release date: 23/03/2020
	*Support OpenVox Cloud Management Platform
	*Optimized the issue that FXO contains both number and name information when checking CID

AnalogGatewayUCP-1.1.6.bin
Release date: 18/02/2020
	*Upgraded Lighttpd version
	*Optimized VPN
	*Fixed ringing issue when FXS gateway is connected to analog phone
	*Fixed the bug that the call loss rate is very high when the outcall concurrency rate is high
	*Added hang code parameter in SIP Advanced settings
	*Fixed the bug where the FXS gateway would occasionally ring uninterruptedly when connected to an analog phone
	*Fixed the bug that CDR Logs error when FXS channels are bound to SIP extensions
	*Optimized route batch generation function
	*Fixed the bug that DHCP settings do not take effect
	*Fixed the bug of VPN function
	*Fixed the bug where FXS extensions failing to send calls to SIP trunk when flexible routing is enabled
	*Fixed the bug that TCP cannot be used normally
	*Added a convenient selection bar when there are multiple SIP accounts
	*Fixed the bug that extensions cannot dial each other after modifying the configuration of SIP extension accounts that are batch uploaded
	*Fixed the sound quality problem of the three-party call when FXS selects Alaw
	*Fixed the bug about Failover FXO function in FXS channels setting
	*Fixed the bug about call restriction function
	*After enabling flexible routing, hide the binding extension and failover FXO parameters in FXS channel settings automatically
	*Fixed the bug that upload configuration failure
	*Fixed  the bug that occasional page stuck when viewing the log module
	*Fixed the bug where the dial tone go off-hook
	*Fixed the bug that modifying directmedia parameter in SIP Advanced settings does not take effect
	*Fixed the bug that MWI function does not take effect
	*Fixed the bug that the SIP account selecting TCP transmission method would not work
	*Fixed the bug where the phone would hear DTMF sound after answering
	*Fixed the bug where add SIP backup address in SIP settings would cause a call to fail
	*Three call features are turned on by default in the factory configuration
	*Modified FXS signaling parameters
	*Fixed the bugs with FXS under analog settings
	*Fixed the bug of national FXS call tone
	*Fixed the bug where called number matching would fail in routing rules from SIP to FXO group
	*Fixed the bug where deleting the batch created SIP(server) accounts was abnormal
Notice:
The system should reset to factory settings and reboot, after changing the module into a different type(FXO-->FXS/FXO-->FXS).

AnalogGatewayUCP-1.1.3.bin
Release date: 29/07/2019
	*Fixed the bug that the driver cannot be loaded successfully after plugging and unplugging the A1008 board;
	*Fixed the bug that the FXS ringing tone format parameter configuration does not take effect after configuring different national standards;
	*Fixed the bug that the FXS flexible routing switch invalidated the dialing rules;
	*Fixed an issue where the calling number and the called number were incorrectly valued.
Notice:
The system should reset to factory settings and reboot, after changing the module into a different type(FXO-->FXS/FXO-->FXS).

AnalogGatewayUCP-1.1.1.bin
Release date: 26/06/2019
	*Fixed the problem that hot plugging the A1008 backplane caused the driver to fail to load successfully;
	*Fixed the IP address bug;
	*Add the remote log function.
Notice:
The system should reset to factory settings and reboot, after changing the module into a different type(FXO-->FXS/FXO-->FXS).

AnalogGatewayUCP-1.1.0.bin
Release date: 04/06/2019
	*Fixed the routing rule problem of the 4O4S hybrid gateway;
	*Add FXS flexible routing configuration for UCP analog gateway;
	*Add system switch function;
	*Add internal communication feature: FXS  extensions can call each other, SIP extensions can call each other, SIP and FXS extensions can call each other;
	*Optimized the Batch Create Rules function;
	*Fixed that FXS gateway cannot use flexible routing mode;
	*Fixed an issue where analog gateway logs could not be automatically cleared;
	*Fixed a problem that the dial tone and busy tone generated by the FXS port are different from the operator's PSTN line.

Notice:
The system should reset to factory settings and reboot, after changing the module into a different type(FXO-->FXS/FXO-->FXS).


AnalogGatewayUCP-1.0.5.bin
Release date: 10/25/2018
*Fixed the unavailable CDR button;
*Fixed the Network Capture function;
*Fixed the issue about TLS call function;
*Optimized the WebRTC AEC effect;
*Optimized the web UI;
*Optimized the CDR feature;
*Optimized the ring group policy;
*Add Port Monitor feature;
*Add the delayed call function.

Notice:
The system should reset to factory settings and reboot, after changing the module into a different type(FXO-->FXS/FXO-->FXS).