×
Notice
The forum is in read only mode.
Forum
Telephony Cards Support
A400/800/1200 Series
2 FXO 来电区分和PHS显示问题
×
Questions about A400/800/1200 Analog Interface Card
2 FXO 来电区分和PHS显示问题
13 years 9 months ago #5951
by sparkwan
硬件: Openvox A400P 2FXO+2FXS Grandstream GXP200
1/2 端口为FXSO,3/4端口 为FXS
拨入,拨出基本正常。
软件:Trixbox 2.8.0.4
问题:
1) 外线1和外线2 号码不同(2外线均为上海电信PSTN),但是GXP200上来电显示都是 device <caller id>
这儿是否能区分外线1和外线2。
2) 如果外线1接了一个 PHS 平台(上海电信小灵通),但是无法获取来电,用电话机正常。
如何调整?
i] Last edited by sparkwan at 2010-7-26 17:56 [/i
13 years 9 months ago #5952
by sparkwan
附上: chan_dahdi_additional.conf
;;;;;;[801]
signalling=fxo_ks
pickupgroup=
mailbox=801@device
immediate=no
echotraining=800
echocancelwhenbridged=no
echocancel=yes
context=from-internal
callprogress=no
callgroup=
callerid=device <801>
busydetect=yes
busycount=3
accountcode=
channel=>3
;;;;;;[802]
signalling=fxo_ks
pickupgroup=
mailbox=802@device
immediate=no
echotraining=800
echocancelwhenbridged=no
echocancel=yes
context=from-internal
callprogress=no
callgroup=
callerid=device <802>
busydetect=no
busycount=7
accountcode=
channel=>4
13 years 9 months ago #5953
by sparkwan
;# Flash Operator Panel will parse this file for dahdi trunk buttons
;# AMPLABEL will be used for the display labels on the buttons
;# %c Dahdi Channel number
;# %n Line number
;# %N Line number, but restart counter
;# Example:
;# ;AMPLABEL:Channel %c - Button %n
;# For Dahdi/* buttons use the following
;# (where x=number of buttons to dislpay)
;# ;AMPWILDCARDLABEL(x):MyLabel
[channels]
language=en
; include dahdi extensions defined in FreePBX
#include dahdi-channels.conf
#include chan_dahdi_additional.conf
; XTDM20B Port #1,2 plugged into PSTN
;AMPLABEL:Channel %c - Button %n
context=from-pstn
signalling=fxs_ks
faxdetect=no
usecallerid=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
group=0
channel=1-2
busydetect=yes
busycount=3
answeronpolarityswitch=yes
hunguponpolarityswitch=yes
callerid=asreceived
13 years 9 months ago #5956
by svolta
你好
麻烦你把你的SSH到我邮箱,我帮你检查一下!
email:This email address is being protected from spambots. You need JavaScript enabled to view it.
msn:This email address is being protected from spambots. You need JavaScript enabled to view it.
13 years 9 months ago #5957
by zhangr
你dahdi的配置文件context里少了这个:
不要手工指定callerid
Forum
Telephony Cards Support
A400/800/1200 Series
2 FXO 来电区分和PHS显示问题
Time to create page: 0.046 seconds